> -----Original Message----- > From: iyonix-support-bounce@xxxxxxxxxxxxx > [mailto:iyonix-support-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Evans > Sent: Tuesday, October 24, 2006 12:37 PM > To: iyonix-support@xxxxxxxxxxxxx > Subject: [iyonix-support] Re: Graphic cards and noise - warning > > On Mon 23 Oct, John Ballance wrote: > > > > In message <ebf0717a4e.john@xxxxxxxxxxxxxxxxxxxxxxxx> > > John Crane <john@xxxxxxxxxxxxxxxxxxxxxxxx> wrote: > > > > > > [snip] > > > > > > > > Yes I see it now and it all now makes sense. Sorry to > appear thick > > > but I hadn't actually appreciated that the left hand > 'sticky up' bit > > > was actually an SMD stood on end. Doh ! > > > > Caution.. it is fragile and will break quite easily if > mistreated with > > a soldering iron. > > Another (bigger?> problem can be tracks being lifted, which > unless you can see a PTH further along the damaged track, can > be very problematic to repair. > > > Chris Evans I can't see the point of fiddling with these cards. They barely fetch a tenner second-hand on eBay. -Neil F. --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support