Re: ISA Array
- From: "Bogdan Florin" <florinb@xxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Sat, 12 Jan 2002 10:59:38 +0200
run dcpromo from a DOS BOX abnd follow the instruction !
Bogdan
-----Original Message-----
From: "cismic" <cismic@xxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Sat, 12 Jan 2002 00:38:22 -0800
Subject: [isalist] Re: ISA Array
> http://www.ISAserver.org
>
>
> Bogdan,
> Shame on me I only kept one with out a backup :(
> I think I'll have to rebuild it over the weekend.
> I have learned my lesson and in the future will keep
> An additional box available.
>
> What is the best way to demote an AD machine to nothing so
> I could move it to another location?
>
> Joseph
>
> -----Original Message-----
> From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx]
> Sent: Saturday, January 12, 2002 12:25 AM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] Re: ISA Array
>
>
> http://www.ISAserver.org
>
>
> If you have 2 AD machine than you are still able to install a ISA after
> COMPLETLY CRUSH ! I have same thing but I have 3 AD machine as backup
> AD.
>
> It was only need to delete the old ARRAY who was left without any
> computer connected to them.
>
> Bogdan
>
> -----Original Message-----
> From: "cismic" <cismic@xxxxxxx>
> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> Date: Fri, 11 Jan 2002 21:21:32 -0800
> Subject: [isalist] Re: ISA Array
>
> > http://www.ISAserver.org
> >
> >
> > My domain/AD is on one machine. My ISA servers crashed. I mean the
> > data and everything. So, they had to be reformatted. When I rebuilt
> > those additional machines, and tried to connect isa server to the AD.
>
> > When ran the initialize isa to AD. The following message box
> appeared.
>
> > "Microsoft Security and Acceleration Sever" definitions could not be
> > installed in active directory.
> >
> > I've still been researching to see if I don't have to rebuild my AD
> > machine. There are only 10 other machines attached where I could
> > joing workgroup and then rejoin the domain. Just did not want to
> have
>
> > to do this.
> >
> > I even tried deleting from AD the ISA FPC tree. Still the same thing.
> > -----Original Message-----
> > From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx]
> > Sent: Friday, January 11, 2002 8:42 PM
> > To: [ISAserver.org Discussion List]
> > Subject: [isalist] Re: ISA Array
> >
> >
> > http://www.ISAserver.org
> >
> >
> > what it is your error Sir ?
> > describe exactly.
> >
> > -----Original Message-----
> > From: "cismic" <cismic@xxxxxxx>
> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> > Date: Fri, 11 Jan 2002 12:53:38 -0800
> > Subject: [isalist] Re: ISA Array
> >
> > > http://www.ISAserver.org
> > >
> > >
> > > Well those methods did not work. Any additional ideas would be
> > > helpful,
> > >
> > > Thank you,
> > >
> > > Joseph
> > >
> > > -----Original Message-----
> > > From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx]
> > > Sent: Friday, January 11, 2002 1:38 AM
> > > To: [ISAserver.org Discussion List]
> > > Subject: [isalist] Re: ISA Array
> > >
> > >
> > > http://www.ISAserver.org
> > >
> > >
> > > 1. Uninstall ISA if you can !
> > > 2. Install ISA again and setup a NEW array !
> > > 3. Setup this ISA
> > > 4. Delete OLD ARRAY !
> > > 5. Install second ARRAY MEMBER.
> > >
> > > Enjoy :))
> > >
> > > If you have AD trouble and you have 2 DC than some of your trouble
> > > will be solved if you manualy move ROLES from one DC to another !
> > >
> > > the very breif docs for doing this trought command line it is
> > > following:
> > >
> > > go to dos prompt !
> > > folowing are commands
> > > - ntdsutil
> > > - roles
> > > - connections
> > > - connect to server NT
> > > - q (At the server connections)
> > >
> > > Seize PDC
> > > Seize schema master
> > > Seize domain naming master
> > > Seize RID master
> > > Seize infrastructure master
> > >
> > > Doing this and reboot will be a good thing for AD.
> > >
> > > I hope this help !
> > > save samwhere ROLES "docs" because it will help you a lot even in
> > more
> > > complex enviromennt where you want to setup roles on difrent
> > machines.
> > >
> > > -----Original Message-----
> > > From: "cismic" <cismic@xxxxxxx>
> > > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> > > Date: Thu, 10 Jan 2002 23:37:56 -0800
> > > Subject: [isalist] ISA Array
> > >
> > > > http://www.ISAserver.org
> > > >
> > > >
> > > > Hello,
> > > >
> > > > Recently I had 2 machines crash. Both were ISA servers. The
> > > > external machine was in firewall mode only. The internal ISA was
> > > > setup as integrated and included in active directory.
> > > >
> > > > I don't know why the ISA machines crashed! Looked like possible
> > > > boot sector virus on both machines. They were built in June. At
> > any
> >
> > > > rate. Is there a way to easily get the internal machine back into
> > > > the ISA Array in active directory? I keep getting the message
> that
> > > > Internet acceleration server is unable to install definitions
> into
>
> > > > active directory.
> > > >
> > > > I've been offline for about 1 week now. Good thing for another
> > > machine
> > >
> > > > to get email! Any clues.
> > > >
> > > > You would think that it would be easy to install or uninstall
> > > > stuff form active directory without issues.
> > > >
> > > > Joseph
> > > >
> > > >
> > > >
> > > > ------------------------------------------------------
> > > > You are currently subscribed to this ISAserver.org Discussion
> List
> > > as:
> > >
> > > > florinb@xxxxxxxxxxx To unsubscribe send a blank email to
> > > > $subst('Email.Unsub')
> > > >
> > >
> > >
> > >
> > > ------------------------------------------------------
> > > You are currently subscribed to this ISAserver.org Discussion List
> > as:
> >
> > > cismic@xxxxxxx To unsubscribe send a blank email to
> > > $subst('Email.Unsub')
> > >
> > >
> > > ------------------------------------------------------
> > > You are currently subscribed to this ISAserver.org Discussion List
> > as:
> >
> > > florinb@xxxxxxxxxxx To unsubscribe send a blank email to
> > > $subst('Email.Unsub')
> >
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
> as:
>
> > cismic@xxxxxxx To unsubscribe send a blank email to
> > $subst('Email.Unsub')
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
> as:
>
> > florinb@xxxxxxxxxxx To unsubscribe send a blank email to
> > $subst('Email.Unsub')
>
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> cismic@xxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> florinb@xxxxxxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
Other related posts:
