Bogdan, Shame on me I only kept one with out a backup :( I think I'll have to rebuild it over the weekend. I have learned my lesson and in the future will keep An additional box available. What is the best way to demote an AD machine to nothing so I could move it to another location? Joseph -----Original Message----- From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx] Sent: Saturday, January 12, 2002 12:25 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: ISA Array http://www.ISAserver.org If you have 2 AD machine than you are still able to install a ISA after COMPLETLY CRUSH ! I have same thing but I have 3 AD machine as backup AD. It was only need to delete the old ARRAY who was left without any computer connected to them. Bogdan -----Original Message----- From: "cismic" <cismic@xxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Date: Fri, 11 Jan 2002 21:21:32 -0800 Subject: [isalist] Re: ISA Array > http://www.ISAserver.org > > > My domain/AD is on one machine. My ISA servers crashed. I mean the > data and everything. So, they had to be reformatted. When I rebuilt > those additional machines, and tried to connect isa server to the AD. > When ran the initialize isa to AD. The following message box appeared. > "Microsoft Security and Acceleration Sever" definitions could not be > installed in active directory. > > I've still been researching to see if I don't have to rebuild my AD > machine. There are only 10 other machines attached where I could > joing workgroup and then rejoin the domain. Just did not want to have > to do this. > > I even tried deleting from AD the ISA FPC tree. Still the same thing. > -----Original Message----- > From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx] > Sent: Friday, January 11, 2002 8:42 PM > To: [ISAserver.org Discussion List] > Subject: [isalist] Re: ISA Array > > > http://www.ISAserver.org > > > what it is your error Sir ? > describe exactly. > > -----Original Message----- > From: "cismic" <cismic@xxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Date: Fri, 11 Jan 2002 12:53:38 -0800 > Subject: [isalist] Re: ISA Array > > > http://www.ISAserver.org > > > > > > Well those methods did not work. Any additional ideas would be > > helpful, > > > > Thank you, > > > > Joseph > > > > -----Original Message----- > > From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx] > > Sent: Friday, January 11, 2002 1:38 AM > > To: [ISAserver.org Discussion List] > > Subject: [isalist] Re: ISA Array > > > > > > http://www.ISAserver.org > > > > > > 1. Uninstall ISA if you can ! > > 2. Install ISA again and setup a NEW array ! > > 3. Setup this ISA > > 4. Delete OLD ARRAY ! > > 5. Install second ARRAY MEMBER. > > > > Enjoy :)) > > > > If you have AD trouble and you have 2 DC than some of your trouble > > will be solved if you manualy move ROLES from one DC to another ! > > > > the very breif docs for doing this trought command line it is > > following: > > > > go to dos prompt ! > > folowing are commands > > - ntdsutil > > - roles > > - connections > > - connect to server NT > > - q (At the server connections) > > > > Seize PDC > > Seize schema master > > Seize domain naming master > > Seize RID master > > Seize infrastructure master > > > > Doing this and reboot will be a good thing for AD. > > > > I hope this help ! > > save samwhere ROLES "docs" because it will help you a lot even in > more > > complex enviromennt where you want to setup roles on difrent > machines. > > > > -----Original Message----- > > From: "cismic" <cismic@xxxxxxx> > > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > > Date: Thu, 10 Jan 2002 23:37:56 -0800 > > Subject: [isalist] ISA Array > > > > > http://www.ISAserver.org > > > > > > > > > Hello, > > > > > > Recently I had 2 machines crash. Both were ISA servers. The > > > external machine was in firewall mode only. The internal ISA was > > > setup as integrated and included in active directory. > > > > > > I don't know why the ISA machines crashed! Looked like possible > > > boot sector virus on both machines. They were built in June. At > any > > > > rate. Is there a way to easily get the internal machine back into > > > the ISA Array in active directory? I keep getting the message that > > > Internet acceleration server is unable to install definitions into > > > active directory. > > > > > > I've been offline for about 1 week now. Good thing for another > > machine > > > > > to get email! Any clues. > > > > > > You would think that it would be easy to install or uninstall > > > stuff form active directory without issues. > > > > > > Joseph > > > > > > > > > > > > ------------------------------------------------------ > > > You are currently subscribed to this ISAserver.org Discussion List > > as: > > > > > florinb@xxxxxxxxxxx To unsubscribe send a blank email to > > > $subst('Email.Unsub') > > > > > > > > > > > ------------------------------------------------------ > > You are currently subscribed to this ISAserver.org Discussion List > as: > > > cismic@xxxxxxx To unsubscribe send a blank email to > > $subst('Email.Unsub') > > > > > > ------------------------------------------------------ > > You are currently subscribed to this ISAserver.org Discussion List > as: > > > florinb@xxxxxxxxxxx To unsubscribe send a blank email to > > $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > cismic@xxxxxxx To unsubscribe send a blank email to > $subst('Email.Unsub') > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > florinb@xxxxxxxxxxx To unsubscribe send a blank email to > $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: cismic@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')