Re: ISA Array
- From: "Bogdan Florin" <florinb@xxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Sat, 12 Jan 2002 06:41:55 +0200
what it is your error Sir ?
describe exactly.
-----Original Message-----
From: "cismic" <cismic@xxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Fri, 11 Jan 2002 12:53:38 -0800
Subject: [isalist] Re: ISA Array
> http://www.ISAserver.org
>
>
> Well those methods did not work. Any additional ideas would be helpful,
>
> Thank you,
>
> Joseph
>
> -----Original Message-----
> From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx]
> Sent: Friday, January 11, 2002 1:38 AM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] Re: ISA Array
>
>
> http://www.ISAserver.org
>
>
> 1. Uninstall ISA if you can !
> 2. Install ISA again and setup a NEW array !
> 3. Setup this ISA
> 4. Delete OLD ARRAY !
> 5. Install second ARRAY MEMBER.
>
> Enjoy :))
>
> If you have AD trouble and you have 2 DC than some of your trouble will
> be solved if you manualy move ROLES from one DC to another !
>
> the very breif docs for doing this trought command line it is
> following:
>
> go to dos prompt !
> folowing are commands
> - ntdsutil
> - roles
> - connections
> - connect to server NT
> - q (At the server connections)
>
> Seize PDC
> Seize schema master
> Seize domain naming master
> Seize RID master
> Seize infrastructure master
>
> Doing this and reboot will be a good thing for AD.
>
> I hope this help !
> save samwhere ROLES "docs" because it will help you a lot even in more
> complex enviromennt where you want to setup roles on difrent machines.
>
> -----Original Message-----
> From: "cismic" <cismic@xxxxxxx>
> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> Date: Thu, 10 Jan 2002 23:37:56 -0800
> Subject: [isalist] ISA Array
>
> > http://www.ISAserver.org
> >
> >
> > Hello,
> >
> > Recently I had 2 machines crash. Both were ISA servers. The external
> > machine was in firewall mode only. The internal ISA was setup as
> > integrated and included in active directory.
> >
> > I don't know why the ISA machines crashed! Looked like possible boot
> > sector virus on both machines. They were built in June. At any rate.
> > Is there a way to easily get the internal machine back into the ISA
> > Array in active directory? I keep getting the message that Internet
> > acceleration server is unable to install definitions into active
> > directory.
> >
> > I've been offline for about 1 week now. Good thing for another
> machine
>
> > to get email! Any clues.
> >
> > You would think that it would be easy to install or uninstall stuff
> > form active directory without issues.
> >
> > Joseph
> >
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
> as:
>
> > florinb@xxxxxxxxxxx To unsubscribe send a blank email to
> > $subst('Email.Unsub')
> >
>
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> cismic@xxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> florinb@xxxxxxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
Other related posts:
