Re: ISA Array
- From: "Bogdan Florin" <florinb@xxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Sat, 12 Jan 2002 10:25:25 +0200
If you have 2 AD machine than you are still able to install a ISA after
COMPLETLY CRUSH ! I have same thing but I have 3 AD machine as backup AD.
It was only need to delete the old ARRAY who was left without any
computer connected to them.
Bogdan
-----Original Message-----
From: "cismic" <cismic@xxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Fri, 11 Jan 2002 21:21:32 -0800
Subject: [isalist] Re: ISA Array
> http://www.ISAserver.org
>
>
> My domain/AD is on one machine. My ISA servers crashed. I mean the
> data and everything. So, they had to be reformatted.
> When I rebuilt those additional machines, and tried to connect isa
> server to the AD. When ran the initialize isa to AD.
> The following message box appeared. "Microsoft Security and
> Acceleration Sever" definitions could not be installed in active
> directory.
>
> I've still been researching to see if I don't have to rebuild my AD
> machine. There are only 10 other machines attached where I could joing
> workgroup and then rejoin the domain. Just did not want to have to do
> this.
>
> I even tried deleting from AD the ISA FPC tree. Still the same thing.
> -----Original Message-----
> From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx]
> Sent: Friday, January 11, 2002 8:42 PM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] Re: ISA Array
>
>
> http://www.ISAserver.org
>
>
> what it is your error Sir ?
> describe exactly.
>
> -----Original Message-----
> From: "cismic" <cismic@xxxxxxx>
> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> Date: Fri, 11 Jan 2002 12:53:38 -0800
> Subject: [isalist] Re: ISA Array
>
> > http://www.ISAserver.org
> >
> >
> > Well those methods did not work. Any additional ideas would be
> > helpful,
> >
> > Thank you,
> >
> > Joseph
> >
> > -----Original Message-----
> > From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx]
> > Sent: Friday, January 11, 2002 1:38 AM
> > To: [ISAserver.org Discussion List]
> > Subject: [isalist] Re: ISA Array
> >
> >
> > http://www.ISAserver.org
> >
> >
> > 1. Uninstall ISA if you can !
> > 2. Install ISA again and setup a NEW array !
> > 3. Setup this ISA
> > 4. Delete OLD ARRAY !
> > 5. Install second ARRAY MEMBER.
> >
> > Enjoy :))
> >
> > If you have AD trouble and you have 2 DC than some of your trouble
> > will be solved if you manualy move ROLES from one DC to another !
> >
> > the very breif docs for doing this trought command line it is
> > following:
> >
> > go to dos prompt !
> > folowing are commands
> > - ntdsutil
> > - roles
> > - connections
> > - connect to server NT
> > - q (At the server connections)
> >
> > Seize PDC
> > Seize schema master
> > Seize domain naming master
> > Seize RID master
> > Seize infrastructure master
> >
> > Doing this and reboot will be a good thing for AD.
> >
> > I hope this help !
> > save samwhere ROLES "docs" because it will help you a lot even in
> more
> > complex enviromennt where you want to setup roles on difrent
> machines.
> >
> > -----Original Message-----
> > From: "cismic" <cismic@xxxxxxx>
> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> > Date: Thu, 10 Jan 2002 23:37:56 -0800
> > Subject: [isalist] ISA Array
> >
> > > http://www.ISAserver.org
> > >
> > >
> > > Hello,
> > >
> > > Recently I had 2 machines crash. Both were ISA servers. The
> > > external machine was in firewall mode only. The internal ISA was
> > > setup as integrated and included in active directory.
> > >
> > > I don't know why the ISA machines crashed! Looked like possible
> > > boot sector virus on both machines. They were built in June. At
> any
>
> > > rate. Is there a way to easily get the internal machine back into
> > > the ISA Array in active directory? I keep getting the message that
> > > Internet acceleration server is unable to install definitions into
> > > active directory.
> > >
> > > I've been offline for about 1 week now. Good thing for another
> > machine
> >
> > > to get email! Any clues.
> > >
> > > You would think that it would be easy to install or uninstall stuff
> > > form active directory without issues.
> > >
> > > Joseph
> > >
> > >
> > >
> > > ------------------------------------------------------
> > > You are currently subscribed to this ISAserver.org Discussion List
> > as:
> >
> > > florinb@xxxxxxxxxxx To unsubscribe send a blank email to
> > > $subst('Email.Unsub')
> > >
> >
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
> as:
>
> > cismic@xxxxxxx To unsubscribe send a blank email to
> > $subst('Email.Unsub')
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
> as:
>
> > florinb@xxxxxxxxxxx To unsubscribe send a blank email to
> > $subst('Email.Unsub')
>
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> cismic@xxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> florinb@xxxxxxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
Other related posts:
