RE: IRC connection behind ISA
- From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Tue, 1 Apr 2003 18:32:54 -0600
Hey guys,
Another thing to consider is that the IRC server requires ident. If
that's the case, try installing the IdentD simulation service on the ISA
Server.
HTH,
Tom
Thomas W Shinder
www.isaserver.org/shinder
ISA Server and Beyond: http://tinyurl.com/1jq1
Configuring ISA Server: http://tinyurl.com/1llp
-----Original Message-----
From: Greg Mulholland [mailto:greg_mul@xxxxxxxxxxxxxxx]
Sent: Monday, March 31, 2003 4:25 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: IRC connection behind ISA
http://www.ISAserver.org
Vinay
The default port for IRC is 6667, isa allows for this in its
protocol definitions by default. However, IRC will also randomly try to
connect with other ports (6660-6669) or something like that so sometimes
it will not connect. There are two ways around this. 1. Create a
protocol definition for each of these ports (one for 6660, one for 6661
etc. This becomes very messy. 2. In the connection window in IRC, next
to the server you connect to you can choose the edit button and set the
port that you connect on. Set that to 6667 and you should be OK.
HTH
Greg Mulholland
Technical Service Manager
Harvey Norman - Knox
Melbourne, Australia
greg_mul@xxxxxxxxxxxxxxx
+613 9881-3730
-----Original Message-----
From: Vinaykumar G [mailto:G.VINAY@xxxxxxxxx]
Sent: Monday, March 31, 2003 7:29 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] IRC connection behind ISA
Hi all,
I would like to know as how IRC can be allowed for the
clients behind ISA(integrated mode). I have a secure NAT client and
would like to connect to IRC server. I have already opened TCP port 6667
for both inbound and outbound but still no luck. Please advice as what
other configuration is required for IRC to work behind ISA.
Regards,
Vinay.
Other related posts:
