[PCB_FORUM] Re: Searchable text (Allegro to Adobe)

Hi,

I have 15.1 and it works fine. 

Instead of vector in printer setup just select native and it works.

Regards,
Rui


----- Start Original Message -----
Sent: Wed, 06 Dec 2006 05:40:24 -0500
From: Mark Salberg <msalberg@xxxxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Searchable text (Allegro to Adobe)

> Hi Gary,
> We found it does not work in v15.1, but does in v.15.7.
> 
> Thanks for your reply.
> Mark
> 
> Macindoe, Gary wrote:
> 
> >Hey Mark,
> >
> >I'm not sure what you are asking, is it about forum posting?
> >I post to "icu-pcb-forum@xxxxxxxxxxxxx" and it works fine.
> >
> >Then, you are having trouble creating a searchable PDF in 15.1?
> >I am on 15.5.1 now, but there was no change from 15.1 as far as I
> >remember.
> >We are also now using Acrobat 7.0 Standard.
> >
> >In Plot Setup, Windows tab, put a check mark next to "Non-vectorized
> >text".
> >Also set the font to Courier.  If you want to see the bottom assemblies
> >as non mirrored, in Plot Setup, General tab, put a check mark next to
> >"Mirror".
> >Then in the Print Setup window, I choose Adobe PDF as the printer name
> >and Paper Size and Orientation as necessary.
> >
> >That's all it should take.  I'm using an Expert license, and I'm not
> >sure if it works or not with a Studio or Studio Performance license.
> >
> >Good luck!
> > 
> >Gary E. MacIndoe
> >PCB Design Engineer
> >Advanced Micro Devices
> >Longmont, Colorado
> > 
> >amd.com
> >gary.macindoe@xxxxxxx
> >
> >-----Original Message-----
> >From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> >[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
> >Sent: Tuesday, December 05, 2006 7:55 AM
> >To: Cadence User Group
> >Subject: [PCB_FORUM] Searchable text (Allegro to Adobe)
> >
> >Hi all,
> >I this address still used or just the "moderator@xxxxxxxxxxxx??
> >
> >
> >We are using Allegro v15.1 trying to plot pdf with searchable text in 
> >Adobe Acrobat standard 6.0?.
> >Can anyone help?
> >I saw the posting regarding mirrored text, but in v15.1, there is no 
> >"unvectorized selection" in plot set-up.
> >Only Vectorized, but is not searchable no matter if selected or not.
> >(see attached)
> >
> >Thanks,
> >Mark
> >
> >
> >________________________________________________________________________
> >_____
> >Scanned by IBM Email Security Management Services powered by
> >MessageLabs. For more information please visit http://www.ers.ibm.com
> >________________________________________________________________________
> >_____
> >-----------------------------------------------------------
> >To subscribe/unsubscribe: 
> >Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >with a subject of subscribe or unsubscribe
> >
> >To view the archives of this list go to
> >http://www.freelists.org/archives/icu-pcb-forum/
> >
> >Problems or Questions:
> >Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >-----------------------------------------------------------
> >
> >
> >
> >
> >-----------------------------------------------------------
> >To subscribe/unsubscribe: 
> >Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >with a subject of subscribe or unsubscribe
> >
> >To view the archives of this list go to 
> >http://www.freelists.org/archives/icu-pcb-forum/
> >
> >Problems or Questions:
> >Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >-----------------------------------------------------------
> >
> >_____________________________________________________________________________
> >Scanned by IBM Email Security Management Services powered by MessageLabs. 
> >For more information please visit http://www.ers.ibm.com
> >_____________________________________________________________________________
> >
> >  
> >
> 
> 
> _____________________________________________________________________________
> Scanned by IBM Email Security Management Services powered by MessageLabs. For 
> more information please visit http://www.ers.ibm.com
> _____________________________________________________________________________
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
> 

----- End Original Message -----
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: