[PCB_FORUM] Re: Searchable text (Allegro to Adobe)

Hey Mark,

I'm not sure what you are asking, is it about forum posting?
I post to "icu-pcb-forum@xxxxxxxxxxxxx" and it works fine.

Then, you are having trouble creating a searchable PDF in 15.1?
I am on 15.5.1 now, but there was no change from 15.1 as far as I
remember.
We are also now using Acrobat 7.0 Standard.

In Plot Setup, Windows tab, put a check mark next to "Non-vectorized
text".
Also set the font to Courier.  If you want to see the bottom assemblies
as non mirrored, in Plot Setup, General tab, put a check mark next to
"Mirror".
Then in the Print Setup window, I choose Adobe PDF as the printer name
and Paper Size and Orientation as necessary.

That's all it should take.  I'm using an Expert license, and I'm not
sure if it works or not with a Studio or Studio Performance license.

Good luck!
 
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices
Longmont, Colorado
 
amd.com
gary.macindoe@xxxxxxx

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
Sent: Tuesday, December 05, 2006 7:55 AM
To: Cadence User Group
Subject: [PCB_FORUM] Searchable text (Allegro to Adobe)

Hi all,
I this address still used or just the "moderator@xxxxxxxxxxxx??


We are using Allegro v15.1 trying to plot pdf with searchable text in 
Adobe Acrobat standard 6.0?.
Can anyone help?
I saw the posting regarding mirrored text, but in v15.1, there is no 
"unvectorized selection" in plot set-up.
Only Vectorized, but is not searchable no matter if selected or not.
(see attached)

Thanks,
Mark


________________________________________________________________________
_____
Scanned by IBM Email Security Management Services powered by
MessageLabs. For more information please visit http://www.ers.ibm.com
________________________________________________________________________
_____
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------




-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: