[PCB_FORUM] Re: Searchable text (Allegro to Adobe)

Hi Mark,

I forgot to say that is 15.1 under Linux, so it looks like it makes a 
difference.

Regards,
Rui


----- Start Original Message -----
Sent: Wed, 06 Dec 2006 06:37:15 -0500
From: Mark Salberg <msalberg@xxxxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Searchable text (Allegro to Adobe)

> Hello Rui,
> See attched Allegro Plot Setup dialog box.
> I do not see any other options here.
> Are we looking at the same location?
> We have Allegro V15.1 PCB Studio Performance.
> 
> 
> Thanks,
> Mark
> 
> 
> Rui Pimenta wrote:
> 
> >Hi,
> >
> >I have 15.1 and it works fine. 
> >
> >Instead of vector in printer setup just select native and it works.
> >
> >Regards,
> >Rui
> >
> >
> >----- Start Original Message -----
> >Sent: Wed, 06 Dec 2006 05:40:24 -0500
> >From: Mark Salberg <msalberg@xxxxxxxxxxxx>
> >To: icu-pcb-forum@xxxxxxxxxxxxx
> >Subject: [PCB_FORUM] Re: Searchable text (Allegro to Adobe)
> >
> >  
> >
> >>Hi Gary,
> >>We found it does not work in v15.1, but does in v.15.7.
> >>
> >>Thanks for your reply.
> >>Mark
> >>
> >>Macindoe, Gary wrote:
> >>
> >>    
> >>
> >>>Hey Mark,
> >>>
> >>>I'm not sure what you are asking, is it about forum posting?
> >>>I post to "icu-pcb-forum@xxxxxxxxxxxxx" and it works fine.
> >>>
> >>>Then, you are having trouble creating a searchable PDF in 15.1?
> >>>I am on 15.5.1 now, but there was no change from 15.1 as far as I
> >>>remember.
> >>>We are also now using Acrobat 7.0 Standard.
> >>>
> >>>In Plot Setup, Windows tab, put a check mark next to "Non-vectorized
> >>>text".
> >>>Also set the font to Courier.  If you want to see the bottom assemblies
> >>>as non mirrored, in Plot Setup, General tab, put a check mark next to
> >>>"Mirror".
> >>>Then in the Print Setup window, I choose Adobe PDF as the printer name
> >>>and Paper Size and Orientation as necessary.
> >>>
> >>>That's all it should take.  I'm using an Expert license, and I'm not
> >>>sure if it works or not with a Studio or Studio Performance license.
> >>>
> >>>Good luck!
> >>>
> >>>Gary E. MacIndoe
> >>>PCB Design Engineer
> >>>Advanced Micro Devices
> >>>Longmont, Colorado
> >>>
> >>>amd.com
> >>>gary.macindoe@xxxxxxx
> >>>
> >>>-----Original Message-----
> >>>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> >>>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg
> >>>Sent: Tuesday, December 05, 2006 7:55 AM
> >>>To: Cadence User Group
> >>>Subject: [PCB_FORUM] Searchable text (Allegro to Adobe)
> >>>
> >>>Hi all,
> >>>I this address still used or just the "moderator@xxxxxxxxxxxx??
> >>>
> >>>
> >>>We are using Allegro v15.1 trying to plot pdf with searchable text in 
> >>>Adobe Acrobat standard 6.0?.
> >>>Can anyone help?
> >>>I saw the posting regarding mirrored text, but in v15.1, there is no 
> >>>"unvectorized selection" in plot set-up.
> >>>Only Vectorized, but is not searchable no matter if selected or not.
> >>>(see attached)
> >>>
> >>>Thanks,
> >>>Mark
> >>>
> >>>
> >>>________________________________________________________________________
> >>>_____
> >>>Scanned by IBM Email Security Management Services powered by
> >>>MessageLabs. For more information please visit http://www.ers.ibm.com
> >>>________________________________________________________________________
> >>>_____
> >>>-----------------------------------------------------------
> >>>To subscribe/unsubscribe: 
> >>>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >>>with a subject of subscribe or unsubscribe
> >>>
> >>>To view the archives of this list go to
> >>>http://www.freelists.org/archives/icu-pcb-forum/
> >>>
> >>>Problems or Questions:
> >>>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >>>-----------------------------------------------------------
> >>>
> >>>
> >>>
> >>>
> >>>-----------------------------------------------------------
> >>>To subscribe/unsubscribe: 
> >>>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >>>with a subject of subscribe or unsubscribe
> >>>
> >>>To view the archives of this list go to 
> >>>http://www.freelists.org/archives/icu-pcb-forum/
> >>>
> >>>Problems or Questions:
> >>>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >>>-----------------------------------------------------------
> >>>
> >>>_____________________________________________________________________________
> >>>Scanned by IBM Email Security Management Services powered by MessageLabs. 
> >>>For more information please visit http://www.ers.ibm.com
> >>>_____________________________________________________________________________
> >>>
> >>> 
> >>>
> >>>      
> >>>
> >>_____________________________________________________________________________
> >>Scanned by IBM Email Security Management Services powered by MessageLabs. 
> >>For more information please visit http://www.ers.ibm.com
> >>_____________________________________________________________________________
> >>-----------------------------------------------------------
> >>To subscribe/unsubscribe: 
> >>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >>with a subject of subscribe or unsubscribe
> >>
> >>To view the archives of this list go to 
> >>http://www.freelists.org/archives/icu-pcb-forum/
> >>
> >>Problems or Questions:
> >>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >>-----------------------------------------------------------
> >>
> >>    
> >>
> >
> >----- End Original Message -----
> >-----------------------------------------------------------
> >To subscribe/unsubscribe: 
> >Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >with a subject of subscribe or unsubscribe
> >
> >To view the archives of this list go to 
> >http://www.freelists.org/archives/icu-pcb-forum/
> >
> >Problems or Questions:
> >Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >-----------------------------------------------------------
> >
> >_____________________________________________________________________________
> >Scanned by IBM Email Security Management Services powered by MessageLabs. 
> >For more information please visit http://www.ers.ibm.com
> >_____________________________________________________________________________
> >
> >  
> >
> 
> 
> _____________________________________________________________________________
> Scanned by IBM Email Security Management Services powered by MessageLabs. For 
> more information please visit http://www.ers.ibm.com
> _____________________________________________________________________________

----- End Original Message -----
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: