[PCB_FORUM] Re: Purge Unused Padstacks
- From: "Macindoe, Gary" <Gary.Macindoe@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Tue, 24 Aug 2010 16:25:38 -0400
Hey Dave,
Thanks for the response. I worked a contract job this past March, and
the job shop had as a checking item that padstacks were purged.
I've been using Allegro since 1995, and before March, I had never ever
purged padstacks (with no known negative effects!).
I was just wondering what might happen at some point if padstacks were
not purged.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
Sent: Tuesday, August 24, 2010 2:18 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: Purge Unused Padstacks
Gary,
I purge as part of cleaning up the database.
I have a little batch file that I run at the end of the job.
One of the lines in the batch is:
dbdoctor -drc -purge_vialist -purge_padstacks %1
I figure, it's free and easy, so why not.
Dave
Dave Seymour
Ixia
www.ixiacom.com
919.267.4840
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
Sent: Tuesday, August 24, 2010 4:00 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Purge Unused Padstacks
Hey guys,
Are you purging unused padstacks before sending your design to Fab
(Tools -> Padstack -> Modify Design Padstack, Purge -> All)?
If so, what is the benefit? What is the downside to not purging? Is it
simply a database cleaning function?
Thanks for any responses.
Regards,
Gary MacIndoe
Senior PCB Layout Designer
Contract - Kelly Services
Covidien
EbD R&D
5920 Longbow Drive
Boulder, CO 80301
303.476.7458
www.covidien.com
Other related posts:
