Yes, removed card, waited two minutes and then replaced it, same problem.----- Original Message ----- From: "ROB MEREDITH" <rmeredith@xxxxxxx>
To: <icon-discuss@xxxxxxxxxxxxx> Sent: Wednesday, February 21, 2007 12:28 PM Subject: [icon-discuss] Re: mini sd card problems
Bill: It would be interesting to know if you have the problem if you simply remove the card, wait a short while, then replace the card without changing its contents in another device. Rob Meredithbiho@xxxxxxx 02/21/07 12:11PM >>>No, doing it from the main menu. Take card out, add some files,replace it and then go to file explorer. Gets hung on the opening file announcement, no matter how long I let it go.Then I reset and it works right away.----- Original Message ----- From: "J. Michael Jones" <mjones@xxxxxxxxxxxxx>To: <icon-discuss@xxxxxxxxxxxxx> Sent: Wednesday, February 21, 2007 11:59 AM Subject: [icon-discuss] Re: mini sd card problemssoHi, Are you in the file explorer when you remove and insert the card? Ifyou will want to exit the file explorer after each change. Thanks, Michael Jones LevelStar 1500 Cherry St. Suite D Louisville, CO 80027 Phone: 303-926-4334 x 707 Fax: 303-926-1787mjones@xxxxxxxxxxxxx-----Original Message-----From: icon-discuss-bounce@xxxxxxxxxxxxx [mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Bill HoltonSent: Tuesday, February 20, 2007 20:01To: icon-discuss@xxxxxxxxxxxxx Subject: [icon-discuss] mini sd card problemsHi. Whenever I remove the mini SD card the Icongives an alert, and whenIreplace it I get another alert. But when I use the file manager totry toaccess the card it will hang and not be able to access the card untilopenafter I do a reset. Anyone else having this problem?----- Original Message ----- From: "Dan Keys" <dnkeys@xxxxxxxxxxxxx>To: <icon-discuss@xxxxxxxxxxxxx> Sent: Tuesday, February 20, 2007 7:26 PM Subject: [icon-discuss] NewsStand problem, I think.Hello, Today I attempted to use the NewsStand, but without any luck. I subscribed to a few papers and downloaded them. However when Ianyof them, nothing happens. The papers don't even open to the firstlevelof articles. The unit then locks up and I have to use Task Managertoclose the NewsStand. Humm. Anyone have any ideas or suggestions? Thanks Dan