Well, it's happening to me when the Icon is turned on. I hear both messages, but the drive is inaccessible until after I do a reset.
----- Original Message ----- From: "gregg boss" <aar6cv@xxxxxxxxxxxxx>
To: <icon-discuss@xxxxxxxxxxxxx> Sent: Wednesday, February 21, 2007 9:11 AM Subject: [icon-discuss] Re: mini sd card problems
Hi,The problem occurs when the card is either removed or inserted when the Iconis off. Unlike other devices, the Icon should be on when inserting or removing the card. You will hear a message when Inserting a new card that the old card is deleted and a new card is inserted. This presumes that the new card is not the same as the old card, otherwise the Icon merely states card removed or found. Gregg Boss -----Original Message----- From: icon-discuss-bounce@xxxxxxxxxxxxx [mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Bill Holton Sent: Tuesday, February 20, 2007 9:01 PM To: icon-discuss@xxxxxxxxxxxxx Subject: [icon-discuss] mini sd card problems Hi. Whenever I remove the mini SD card the Icongives an alert, and when I replace it I get another alert. But when I use the file manager to try toaccess the card it will hang and not be able to access the card until afterI do a reset. Anyone else having this problem?----- Original Message ----- From: "Dan Keys" <dnkeys@xxxxxxxxxxxxx>To: <icon-discuss@xxxxxxxxxxxxx> Sent: Tuesday, February 20, 2007 7:26 PM Subject: [icon-discuss] NewsStand problem, I think.Hello, Today I attempted to use the NewsStand, but without any luck.I subscribed to a few papers and downloaded them. However when I open anyof them, nothing happens. The papers don't even open to the first level of articles. The unit then locks up and I have to use Task Manager to close the NewsStand. Humm. Anyone have any ideas or suggestions? Thanks Dan