[icon-discuss] icon and stereo mics

  • From: Kevin Jones <kevin@xxxxxxxxxxx>
  • To: icon-discuss@xxxxxxxxxxxxx
  • Date: Wed, 21 Feb 2007 23:39:45 -0600

Just made an interesting discovery. I was playing around with the icon and the audio technica 822 mic. I found that if I set the recording level around 55 or higher i only got sound on the right channel and some times neither channel but if I set the level around 50 or lower I got both channels just fine; but the icon wasn't vibrating like when it clips, and the icon was faithfully reporting clips all along. Do we know how much more floor noise the icon has over say an edirol r1 the a t 822 mics were kind of noisy on the r1 also, so it's hard for me to compare. using a pre-amp would probably make any noise floor on the icon ignorable. I'm going to a concert of 17th century harpsichord music Sunday so I'm waiting to see how the recording will come out. 

Kevin


ROB MEREDITH wrote:

Bill:

It would be interesting to know if you have the problem if you simply
remove the card, wait a short while, then replace the card without
changing its contents in another device.

Rob Meredith


biho@xxxxxxx 02/21/07 12:11PM >>>

No, doing it from the main menu.  Take card out, add some files,
replace it and then go to file explorer. Gets hung on the opening file announcement, no matter how long I let it go. 
Then I reset and it works right away.
----- Original Message ----- From: "J. Michael Jones" <mjones@xxxxxxxxxxxxx> 
To: <icon-discuss@xxxxxxxxxxxxx>
Sent: Wednesday, February 21, 2007 11:59 AM
Subject: [icon-discuss] Re: mini sd card problems



Hi,

Are you in the file explorer when you remove and insert the card?  If
so 
you
will want to exit the file explorer after each change.

Thanks,



Michael Jones
LevelStar
1500 Cherry St. Suite D
Louisville, CO  80027
Phone: 303-926-4334 x 707
Fax: 303-926-1787
mjones@xxxxxxxxxxxxx 
-----Original Message-----
From: icon-discuss-bounce@xxxxxxxxxxxxx [mailto:icon-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Bill Holton 
Sent: Tuesday, February 20, 2007 20:01
To: icon-discuss@xxxxxxxxxxxxx Subject: [icon-discuss] mini sd card problems 

Hi.
Whenever I remove the mini SD card the Icongives an alert, and when

I

replace it I get another alert.  But when I use the file manager to

try to

access the card it will hang and not be able to access the card until



after
I do a reset.  Anyone else having this problem?
----- Original Message ----- From: "Dan Keys" <dnkeys@xxxxxxxxxxxxx> 
To: <icon-discuss@xxxxxxxxxxxxx>
Sent: Tuesday, February 20, 2007 7:26 PM
Subject: [icon-discuss] NewsStand problem, I think.



Hello,
Today I attempted to use the NewsStand, but without any luck.
I subscribed to a few papers and downloaded them. However when I
open 
any
of them, nothing happens. The papers don't even open to the first 
level

of articles. The unit then locks up and I have to use Task  Manager

to

close the NewsStand.
Humm. Anyone have any ideas or suggestions?
Thanks
Dan

Other related posts:

  1. Home
  2. icon-discuss
  3. Archive
  4. 02-2007