Hey guys,
I dropped the ball on signing up for the soldering class. I'd heard it
was popular, but I failed to reckon that it would sell out. Does
anyone have an extra ticket that they would be willing to sell me?
Cordially,
J. Bryant Hill
On Tue, Mar 19, 2013 at 6:16 PM, jeff kephart <n3glv1963@xxxxxxxxx
<mailto:n3glv1963@xxxxxxxxx>> wrote:
Nice thanks
On Mar 19, 2013 6:15 PM, "Dan Stahlke" <dan@xxxxxxxxxxx
<mailto:dan@xxxxxxxxxxx>> wrote:
I have a box of surface mount parts that might possibly have
what you need, I just need to find it. Either it is buried in
boxes in my apartment or I brought it into HackPgh and it is
buried somewhere there, possibly in the big box marked
"microchips". I believe it is a small red sparkfun box.
On 03/19/2013 02:06 PM, jeff kephart wrote:
no, electrolytic. the C6 is I think a 22uf 16v
the one you tacked onto the one pi fell off later that day
and the
one on the new pi somehow also is gone. I now have cases to
keep them in but figured if you had something I could put
back on
there, it would be a good idea.
Thanks
On Tue, Mar 19, 2013 at 7:45 AM, Matthew Beckler
<matthew.beckler@xxxxxxxxx
<mailto:matthew.beckler@xxxxxxxxx>> wrote:
Anthony, sounds great to me, I think we'll have plenty
of helpers.
Jeff, the only SMT caps I have are 1206 footprint
0.1uF ceramic caps. Will
those work for you? I'll bring some to the meeting
tomorrow and also on
Saturday.
On Mon, Mar 18, 2013 at 11:23 PM, Anthony Cascone
<ajc317@xxxxxxxxx <mailto:ajc317@xxxxxxxxx>> wrote:
I was interested in watching (if not helping), so
that I could potentially
teach the class in the future. Let me know if
there is anything I can help
with.
Anthony
On Monday, March 18, 2013, jeff kephart wrote:
Weather permitting (bike) I'm in.
Btw, can you spare two of the smd filter caps
for a pi?
(c6)
On Mon, Mar 18, 2013 at 10:08 PM, Matthew Beckler
<matthew.beckler@xxxxxxxxx
<mailto:matthew.beckler@xxxxxxxxx>> wrote:
Hello everyone,
I'm running the learn to solder class on
Saturday, and I'm looking for
a few
good guys and gals to help out. You don't
need to have any prior
teaching
experience, just know your way around a
soldering iron for easy through
hole
parts. Basically you would just be
offering suggestions on soldering
technique, answering simple questions
about which part goes where on
the
PCB, that sort of thing. I only need one
or two helpers, so please
reply to
the list if you can make it.
The class starts at 1pm, so if you could
arrive at 12:50 or
thereabouts,
that would be swell. Please let me know if
you can make it.
Thanks much!
-Matthew
