Nice thanks On Mar 19, 2013 6:15 PM, "Dan Stahlke" <dan@xxxxxxxxxxx> wrote: > I have a box of surface mount parts that might possibly have what you > need, I just need to find it. Either it is buried in boxes in my apartment > or I brought it into HackPgh and it is buried somewhere there, possibly in > the big box marked "microchips". I believe it is a small red sparkfun box. > > On 03/19/2013 02:06 PM, jeff kephart wrote: > >> no, electrolytic. the C6 is I think a 22uf 16v >> the one you tacked onto the one pi fell off later that day and the >> one on the new pi somehow also is gone. I now have cases to >> keep them in but figured if you had something I could put back on >> there, it would be a good idea. >> Thanks >> >> >> On Tue, Mar 19, 2013 at 7:45 AM, Matthew Beckler >> <matthew.beckler@xxxxxxxxx> wrote: >> >>> Anthony, sounds great to me, I think we'll have plenty of helpers. >>> >>> Jeff, the only SMT caps I have are 1206 footprint 0.1uF ceramic caps. >>> Will >>> those work for you? I'll bring some to the meeting tomorrow and also on >>> Saturday. >>> >>> >>> On Mon, Mar 18, 2013 at 11:23 PM, Anthony Cascone <ajc317@xxxxxxxxx> >>> wrote: >>> >>>> I was interested in watching (if not helping), so that I could >>>> potentially >>>> teach the class in the future. Let me know if there is anything I can >>>> help >>>> with. >>>> >>>> Anthony >>>> >>>> On Monday, March 18, 2013, jeff kephart wrote: >>>> >>>>> Weather permitting (bike) I'm in. >>>>> Btw, can you spare two of the smd filter caps for a pi? >>>>> (c6) >>>>> >>>>> >>>>> On Mon, Mar 18, 2013 at 10:08 PM, Matthew Beckler >>>>> <matthew.beckler@xxxxxxxxx> wrote: >>>>> >>>>>> Hello everyone, >>>>>> >>>>>> I'm running the learn to solder class on Saturday, and I'm looking for >>>>>> a few >>>>>> good guys and gals to help out. You don't need to have any prior >>>>>> teaching >>>>>> experience, just know your way around a soldering iron for easy >>>>>> through >>>>>> hole >>>>>> parts. Basically you would just be offering suggestions on soldering >>>>>> technique, answering simple questions about which part goes where on >>>>>> the >>>>>> PCB, that sort of thing. I only need one or two helpers, so please >>>>>> reply to >>>>>> the list if you can make it. >>>>>> >>>>>> The class starts at 1pm, so if you could arrive at 12:50 or >>>>>> thereabouts, >>>>>> that would be swell. Please let me know if you can make it. >>>>>> >>>>>> Thanks much! >>>>>> >>>>>> -Matthew >>>>>> >>>>> > > >