Anthony, sounds great to me, I think we'll have plenty of helpers. Jeff, the only SMT caps I have are 1206 footprint 0.1uF ceramic caps. Will those work for you? I'll bring some to the meeting tomorrow and also on Saturday. On Mon, Mar 18, 2013 at 11:23 PM, Anthony Cascone <ajc317@xxxxxxxxx> wrote: > I was interested in watching (if not helping), so that I could potentially > teach the class in the future. Let me know if there is anything I can > help with. > > Anthony > > On Monday, March 18, 2013, jeff kephart wrote: > >> Weather permitting (bike) I'm in. >> Btw, can you spare two of the smd filter caps for a pi? >> (c6) >> >> >> On Mon, Mar 18, 2013 at 10:08 PM, Matthew Beckler >> <matthew.beckler@xxxxxxxxx> wrote: >> > Hello everyone, >> > >> > I'm running the learn to solder class on Saturday, and I'm looking for >> a few >> > good guys and gals to help out. You don't need to have any prior >> teaching >> > experience, just know your way around a soldering iron for easy through >> hole >> > parts. Basically you would just be offering suggestions on soldering >> > technique, answering simple questions about which part goes where on the >> > PCB, that sort of thing. I only need one or two helpers, so please >> reply to >> > the list if you can make it. >> > >> > The class starts at 1pm, so if you could arrive at 12:50 or thereabouts, >> > that would be swell. Please let me know if you can make it. >> > >> > Thanks much! >> > >> > -Matthew >> >>