no, electrolytic. the C6 is I think a 22uf 16v the one you tacked onto the one pi fell off later that day and the one on the new pi somehow also is gone. I now have cases to keep them in but figured if you had something I could put back on there, it would be a good idea. Thanks On Tue, Mar 19, 2013 at 7:45 AM, Matthew Beckler <matthew.beckler@xxxxxxxxx> wrote: > Anthony, sounds great to me, I think we'll have plenty of helpers. > > Jeff, the only SMT caps I have are 1206 footprint 0.1uF ceramic caps. Will > those work for you? I'll bring some to the meeting tomorrow and also on > Saturday. > > > On Mon, Mar 18, 2013 at 11:23 PM, Anthony Cascone <ajc317@xxxxxxxxx> wrote: >> >> I was interested in watching (if not helping), so that I could potentially >> teach the class in the future. Let me know if there is anything I can help >> with. >> >> Anthony >> >> On Monday, March 18, 2013, jeff kephart wrote: >>> >>> Weather permitting (bike) I'm in. >>> Btw, can you spare two of the smd filter caps for a pi? >>> (c6) >>> >>> >>> On Mon, Mar 18, 2013 at 10:08 PM, Matthew Beckler >>> <matthew.beckler@xxxxxxxxx> wrote: >>> > Hello everyone, >>> > >>> > I'm running the learn to solder class on Saturday, and I'm looking for >>> > a few >>> > good guys and gals to help out. You don't need to have any prior >>> > teaching >>> > experience, just know your way around a soldering iron for easy through >>> > hole >>> > parts. Basically you would just be offering suggestions on soldering >>> > technique, answering simple questions about which part goes where on >>> > the >>> > PCB, that sort of thing. I only need one or two helpers, so please >>> > reply to >>> > the list if you can make it. >>> > >>> > The class starts at 1pm, so if you could arrive at 12:50 or >>> > thereabouts, >>> > that would be swell. Please let me know if you can make it. >>> > >>> > Thanks much! >>> > >>> > -Matthew >>> >