For off-site access, a dial-back modem is the absolute best security method. For the router installation, there are password requirements for access to the router, then separate for the WP or AW attached. If you don't set Go Global up to automatically log in, you will have at least two levels of password protection. -----Original Message----- From: Brian Long [mailto:blong@xxxxxxx] Sent: Monday, May 13, 2002 12:18 PM To: Foxboro Subject: [foxboro] go global access I'm in need of advice on the most secure way to allow go-global users acces to an AW51b box. Thanks, Brian Long Green Bay Packaging Arkansas Kraft Division _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave