Re: [foxboro] connecting to CP
- From: "Douglas G. Lloyd" <DGLControls@xxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 6 Oct 2003 11:02:01 -0400
Janet,
Huh? This seems like very odd advice. Writing over the checkpoint file
with the initialized checkpoint wipes out the last good checkpoint file. If
you then rebooted the CP, you'd wind up with no control database in the CP
and a very confused CSA. I assume that deleting the /opt/fox/csa files
takes care of the latter problem, but why would Ken want to do this?
Doug Lloyd
DGL Controls
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]On
Behalf Of Janet Parker
Sent: Friday, October 03, 2003 4:57 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] connecting to CP
Hi Ken,
You can try the following:
Compare the size of the two files DB<CP letterbug>.init to DB<CP
letterbug>.UC in the /usr/fox/sp/files directory. If they are different
sizes, copy the DB<CP letterbug>..init to DB<CP letterbug>..UC.
Another option, which will likely force you to reboot and reload the
controls is listed below:
On the AW, change directory to /opt/fox/csa and delete the following files:
CMPD_INDEX.datCMPD_INDEX.idxSTN_INDEX.idxSTN_INDEX.dat
Additionally, remove the <SCP Letterbug ID> directory.
However, I would call the help desk before performing any of these
procedures.
Regards,
Janet Parker
Senior Applications Engineer
SimSci-Esscor
T +1 760 268 7774
F +1 760 268 7707
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]On Behalf Of
Ken.E.Moore@xxxxxxxxxxx
Sent: Friday, October 03, 2003 12:15 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] connecting to CP
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
