Re: [foxboro] WP51A Restore problem
- From: Kashif Ijaz <kashifijaz93@xxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Sun, 16 Mar 2008 17:09:46 +0500
Mark
I changed the CDROM media and the booted from a new version 4.3 DAY 0 CDROM.
When I tried mount, it worked. I listed /etc/vfstab file. It goes like this
both / and /usr ' mount at boot option given as no. Should I change to yes and
try rebooting.
Regards,
Kashif Ijaz
INTECH Process Automation
Subject: Re: [foxboro] WP51A Restore problem> Date: Sun, 16 Mar 2008 07:07:14
-0400> From: mark.gardner@xxxxxxxxxxxxxxxx> To: foxboro@xxxxxxxxxxxxx> > When
boot from CDROM it apears your file system are intact but you > can't get by
the "mount" issue. Have you tried another CDROM media> or can you put the hard
drive into another machine? > TO diagnose further you may hace to truss the
mount cammand that is failing> and see it give any indications of where it is
failing.> Mark> ________________________________> > From:
foxboro-bounce@xxxxxxxxxxxxx on behalf of Kashif Ijaz> Sent: Sat 3/15/2008 7:57
AM> To: foxboro@xxxxxxxxxxxxx> Subject: Re: [foxboro] WP51A Restore problem> >
> > Mark,> > When I ran fsck /dev/rdsk/c0t3d0s6, it is giving> > **
/dev/rdsk/c0t3d0s6> ** Last mounted on /usr> **Phase1- Check Blocks and Sizes>
**Phase2- Check Pathnames> **Phase3- Check Connectivity> **Phase4- Check
Reference Counts> **Phase5- Check Cyl Groups> 12877 files, 209105 used, 472717
free(5061 frags, 58457 blocks, 0.7% fragmentation)> /dev/rdsk/c0t3d0s6 FILE
SYSTEM STATE SET TO OKAY> **** FILE SYSTEM WAS MODIFIED****> > When I ran fsck
/dev/rdsk/c0t3d0s0, it is giving> > ** /dev/rdsk/c0t3d0s0> ** Last mounted on
/> **Phase1- Check Blocks and Sizes> **Phase2- Check Pathnames> **Phase3- Check
Connectivity> **Phase4- Check Reference Counts> **Phase5- Check Cyl Groups>
FREE BLK COUNT(S) WRONG IN SUPERBLK> SALVAGE? y> > 5191 files, 28297 used,
11598 free(766 frags, 1354 blocks, 1.9% fragmentation)> /dev/rdsk/c0t3d0s0 FILE
SYSTEM STATE SET TO OKAY> **** FILE SYSTEM WAS MODIFIED****> > When I ran fsck
/dev/rdsk/c0t3d0s7, it is giving> > ** /dev/rdsk/c0t3d0s7> ** Last mounted on
/opt> **Phase1- Check Blocks and Sizes> **Phase2- Check Pathnames> **Phase3-
Check Connectivity> **Phase4- Check Reference Counts> **Phase5- Check Cyl
Groups> 887 files, 44578 used, 149861 free(2021 frags, 18480 blocks, 1.0%
fragmentation)> > Also when I give format command> > It returns> AVAILABLE DISK
SELECTIONS:> 0. c0t3d0 <SUN1.05 cyl 2036 alt 2 hd 14 sec 72>> > When I am
mounting other partition like opt slice 7, it is still giving me following
error.> > mount:warning:line for "Segmentation Fault.> > Can anyone help on
this.> > Regards,> > Kashif Ijaz> INTECH Process Automation>
-------------------------------------> Kashif,It is difficult to try and
diagnose this tye of problem remotely.When booted from CDROM I would try to
verify I have a valid formattedsystem hard drive installed in the workstaiton.
For example:1. Run the "format" command and verify valid hard disk/target
install like "c0t3d0".(Use CNTRL-D to exit without making changes to the
drive)2. If your uncomfortable running the format command try and verify the
disktry using the "prtvtoc" command, for example:# prtvtoc
/dev/rdsk/c0t3d0s0The output should reflect the partitioning as described in
the B0193ND.3. If the format appears correct perform an "fsck" on "usr"
partition.# fsck /dev/rdsk/c0t6d0s64. Have you try mounting one of the other
partitions like root or opt?Root is slice 0, opt slice
7.Mark--------------------------------------------------------> From:
kashifijaz93@xxxxxxxxxxx> To: foxboro@xxxxxxxxxxxxx> Subject: Re: [foxboro]
WP51A Restore problem> Date: Sat, 8 Mar 2008 14:04:41 +0500> > After booting
from the CDROM> , when I type> > #mount /dev/dsk/c0t3d0s6 /mnt> > It gives me
error> > mount:warning:line for "Segmentation Fault> > Can you explain this.> >
Regards,> > Kashif Ijaz> INTECH Process Automation> Subject: Re: [foxboro]
WP51A Restore problem> Date: Thu, 6 Mar 2008 12:19:55 -0500> From:
mark.gardner@xxxxxxxxxxxxxxxx> To: foxboro@xxxxxxxxxxxxx> > I assume your
referring to the internal hard disk of a 51B Sparc 5> workstation. The "c0t3d0"
is the correct SCSI address for the system> Hard drive. Refer to document
B0193ND, table 2-18 specifies the> AP/AW Hard Drive Partitioning Conventions.
=> > > If you want to mount "c0t3d0s6" which maps to the "/usr"> File system
after you have booted from CDROM try:> # mount /dev/dsk/c0t3d0s6 /mnt> Mark
Gardner> > -----Original Message-----> From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]> On Behalf Of Kashif Ijaz> Sent:
Thursday, March 06, 2008 11:45 AM> To: foxboro@xxxxxxxxxxxxx> Subject: Re:
[foxboro] WP51A Restore pr> oblem> > Dear all> > This hard disk is being
recognized by "probe-scsi-all" command on ok =3D> prompt.> Can it be that the
SCSI address on the hard disk is wrongly set.> Right =3D> now> "probe-scsi-all"
is giving me the hard disk on Target 3 unit 0. May be =3D> in> the earlier
backup the device was on another SCSI address.> > How to change the SCSI target
address setting on the hard disk. Also how> =3D> can> I mount the hard disk
after boot up from the CDROM. Where I have to look> =3D> at> in the hard disk
file where the SCSI setting are like /dev/dsk/c0t3d0s6> > Regards,> > Kashif
Ijaz> INTECH Process Automation> > > > Kashif Ijaz <kashifijaz93@xxxxxxxxxxx>
wrote:> >=3D20> > We had 3 dd backup tapes taken at different times of WP51A
having 1.05> =3D> =3D3D> > GB> > tape by following command. The machine was
running I/A version 4.3.> >=3D20> > dd if=3D3D3D/dev/rsd0c of=3D3D3D/dev/rst0
bs=3D3D126b> >=3D20> > Now I have found the same machine and put a 1.05 GB
(similar) hard => 3D> disk=3D20> > =3D3D> > in> > it. Booted up the system by
4.1 DAY 0 CDROM (as 4.3 Day 0 was not =3D3D> > booting up> > the machine) and
restored the system by followin> g drives> >=3D20> > dd if=3D3D3D/dev/rst0
of=3D3D3D/dev/rsd0c bs=3D3D3D126b> >=3D20> > It is doing so successfully as the
indicated message=3D3D20> >=3D20> > 16,288 records out> > 16,288 records in>
>=3D20> > I have already connected the Ethernet port and Serial port A to the
=3D> =3D3D> > powered> > up DNBI having the letterbug (61WP32, as this the
logical name of the> > station). Because I believe that WP51A will only boot up
properly to =3D> =3D3D> > Foxboro> > shell if it is connected to DNBI as it
cannot boot up in standalone =3D> =3D3D> > mode.> >=3D20> > But while booting
it gives following messages> >=3D20> > Hostname : 61WP32> > mount :
/dev/dsk/c0t3d0s6. no such device> > /sbin/swapadd : expr: not found> >
/sbin/swapadd : /usr/sbin/swap : not found> > WARNING : /usr/sbin/fsck not
found ...........> ..........=3D3D20> >=3D20> > And goes to ok prompt> >=3D20>
> Can you answer following question> >=3D20> > 1- Why the WP51A is not booting
from version 4.3 Day 0 CD (I =3D> > have> > tried 3 different CDs). This
machine was originally having version 4.3> > installed on it.> > 2- It is
booting from version 4.1 Day 0 CD. Is this machine> > compatible only with
version 4.1> > 3- Do WP51A needs to be connected to it's DNBI while booting> >
4- Is it not recognizing the hard disk( because of message =3D> =3D3D> > "mount
:> > /dev/dsk/c0t3d0s6. no such device"). When in ok prompt =3D>
"probe-scsi-all"=3D20> > =3D3D> > is> > showing the hard disk as Target 3 unit
0 Disk SEAGATE ST31200N> > SUN1.0587220093789> >=3D20> > I have the commit disk
but since the WP51A is not booting from the 4.3> =3D> =3D3D> > Day 0> > CD, I
cannot "ia_install" it. While booting it is giving spurious =3D> errors> > like
Bad trap, memory alignment, core dump. What is the reason for =3D> such> >
errors.> >=3> D20> > Can you see if there is some Foxboro expert within CSC
experienced in> =3D> =3D3D> > WP51A,> > version 4.3 and "dd" command.> >=3D20>
> Regards,> > Kashif Ijaz> > INT> ECH Process Automation> >=3D20> >=3D20> >
=3D20> > =3D20> > =3D>
_______________________________________________________________________> > This
mailing list is neither sponsored nor endorsed by Invensys =3D> Process> >
Systems (formerly The Foxboro Company). Use the info you obtain here =3D> at> >
your own risks. Read =3D> http://www.thecassandraproject.org/disclaimer.html> >
=3D20> > foxboro mailing list: =3D> //www.freelists.org/list/foxboro> > to
subscribe: =3D> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin> > to
unsubscribe: =3D> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave> >>
=3D20> =3D20>
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). U> se the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> =3D20> foxboro
mailing list: //www.freelists.org/list/foxboro> to> subscribe: =3D>
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin> to unsubscribe: =3D>
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave> =3D20> > => > => >
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> => > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave> => > > > *
Confidentiality Notice:> This e-mail and any associated files are intended
solely for the individual=> or entity to whom they are addressed> . Please do
not copy it or use it for => any purposes, or disclose its contents to any
other person. Further, this e=> -mail and any associated files may be
confidential and fu> rther may be legal=> ly privileged. This email is from the
Invensys Process Systems business uni=> t of Invensys plc which is a company
registered in England and Wales with i=> ts registered office at Portland
House, Bressenden Place, London, SW1E 5BF => (Registered number 166023). For a
list of European legal entities within t=> he Invensys Process Systems business
group, please click here http://www.in= <http://www.in=/> >
vensys.com/legal/default.asp?top_nav_id=3D77&nav_id=3D80&prev_id=3D77.> > If
you have received this e-mail in error, you are on notice of its status.=>
Please notify us immediately by reply e-mail and then delete this message =>
from your system. Thank you for your co-operation. You may contact our Help=>
desk on +44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx T> =>
his e-mail and a> ny attachments thereto may be subject to the terms of any a=>
greements between Invensys (and/or its subsidiaries and affiliates) and the=>
recipient (and/or its subsidiaries and> affiliates).> > > > >
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave> >
_________________________________________________________________> Express
yourself instantly with MSN Messenger! Download today it's FREE!>
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/> > >
_______________________________________________________________________> This
mailing l> ist is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave>>
_________________________________________________________________> Discover the
new Windows Vista>
http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE> > >
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave> > > > > > > *
Confidentiality Notice:> This e-mail and any associated files are intended
solely for the individual or entity to whom they are addressed. Please do not
copy it or use it for any purposes, or disclose its contents to any other
person. Further, this e-mail and any associated files may be confidential and
further may be legally privileged. This email is from the Invensys Process
Systems business unit of Invensys plc which is a company registered in England
and Wales with its registered office at Portland House, Bressenden Place,
London, SW1E 5BF (Registered number 166023). For a list of European legal
entities within the Invensys Process Systems business group, please click here
http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77.>
> If you have received this e-mail in error, you are on notice of its status.
Please notify us immediately by reply e-mail and then delete this message from
your system. Thank you for your co-operation. You may contact our Helpdesk on
+44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail
and any attachments thereto may be subject to the terms of any agreements
between Invensys (and/or its subsidiaries and affiliates) and the recipient
(and/or its subsidiaries and affiliates).> > > -- No attachments (even text)
are allowed --> -- Type: application/ms-tnef> -- File: winmail.dat> > > > >
_______________________________________________________________________> This
mailing list is neither sponsored nor endorsed by Invensys Process> Systems
(formerly The Foxboro Company). Use the info you obtain here at> your own
risks. Read http://www.thecassandraproject.org/disclaimer.html> > foxboro
mailing list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=join> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave>
_________________________________________________________________
Discover the new Windows Vista
http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
