Re: [foxboro] WP51A Restore problem
- From: "Landry, Scott" <scott.landry@xxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Sun, 16 Mar 2008 11:14:03 -0400
Kashif,
The original subject is WP51A restore,
Assumptions:
Your dump tape is good. Was it made with wpdmp0 or backup ?
Booting off a V4.3 Day0 looks to be a major step, since booting
off V4.1 Day0 worked.
While booted off the V4.3 Day0 CD;
ia_install WP51
pick type A
yes
=
Does the ia_install program finish ?
If not what errors. ?
Regards,
Scott
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Kashif Ijaz
Sent: Sunday, March 16, 2008 7:10 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] WP51A Restore problem
Mark
=
I changed the CDROM media and the booted from a new version 4.3 DAY 0
CDROM. When I tried mount, it worked. I listed /etc/vfstab file. It goes
like this
=
both / and /usr ' mount at boot option given as no. Should I change to
yes and try rebooting.
=
Regards,
=
Kashif Ijaz
INTECH Process Automation
=
Subject: Re: [foxboro] WP51A Restore problem> Date: Sun, 16 Mar 2008
07:07:14 -0400> From: mark.gardner@xxxxxxxxxxxxxxxx> To:
foxboro@xxxxxxxxxxxxx> > When boot from CDROM it apears your file system
are intact but you > can't get by the "mount" issue. Have you tried
another CDROM media> or can you put the hard drive into another machine?
> TO diagnose further you may hace to truss the mount cammand that is
failing> and see it give any indications of where it is failing.> Mark>
________________________________> > From: foxboro-bounce@xxxxxxxxxxxxx
on behalf of Kashif Ijaz> Sent: Sat 3/15/2008 7:57 AM> To:
foxboro@xxxxxxxxxxxxx> Subject: Re: [foxboro] WP51A Restore problem> > >
> Mark,> > When I ran fsck /dev/rdsk/c0t3d0s6, it is giving> > **
/dev/rdsk/c0t3d0s6> ** Last mounted on /usr> **Phase1- Check Blocks and
Sizes> **Phase2- Check Pathnames> **Phase3- Check Connectivity>
**Phase4- Check Reference Counts> **Phase5- Check Cyl Groups> 12877
files, 209105 used, 472717 free(506
1 frags, 58457 blocks, 0.7% fragmentation)> /dev/rdsk/c0t3d0s6 FILE
SYSTEM STATE SET TO OKAY> **** FILE SYSTEM WAS MODIFIED****> > When I
ran fsck /dev/rdsk/c0t3d0s0, it is giving> > ** /dev/rdsk/c0t3d0s0> **
Last mounted on /> **Phase1- Check Blocks and Sizes> **Phase2- Check
Pathnames> **Phase3- Check Connectivity> **Phase4- Check Reference
Counts> **Phase5- Check Cyl Groups> FREE BLK COUNT(S) WRONG IN SUPERBLK>
SALVAGE? y> > 5191 files, 28297 used, 11598 free(766 frags, 1354 blocks,
1.9% fragmentation)> /dev/rdsk/c0t3d0s0 FILE SYSTEM STATE SET TO OKAY>
**** FILE SYSTEM WAS MODIFIED****> > When I ran fsck /dev/rdsk/c0t3d0s7,
it is giving> > ** /dev/rdsk/c0t3d0s7> ** Last mounted on /opt>
**Phase1- Check Blocks and Sizes> **Phase2- Check Pathnames> **Phase3-
Check Connectivity> **Phase4- Check Reference Counts> **Phase5- Check
Cyl Groups> 887 files, 44578 used, 149861 free(2021 frags, 18480 blocks,
1.0% fragmentation)> > Also when I give format command> > It returns>
AVAILA
BLE DISK SELECTIONS:> 0. c0t3d0 <SUN1.05 cyl 2036 alt 2 hd 14 sec 72>>
> When I am mounting other partition like opt slice 7, it is still
giving me following error.> > mount:warning:line for "Segmentation
Fault.> > Can anyone help on this.> > Regards,> > Kashif Ijaz> INTECH
Process Automation> -------------------------------------> Kashif,It is
difficult to try and diagnose this tye of problem remotely.When booted
from CDROM I would try to verify I have a valid formattedsystem hard
drive installed in the workstaiton. For example:1. Run the "format"
command and verify valid hard disk/target install like "c0t3d0".(Use
CNTRL-D to exit without making changes to the drive)2. If your
uncomfortable running the format command try and verify the disktry
using the "prtvtoc" command, for example:# prtvtoc /dev/rdsk/c0t3d0s0The
output should reflect the partitioning as described in the B0193ND.3. If
the format appears correct perform an "fsck" on "usr" partition.# fsck
/dev/rdsk/c0t6d0s
64. Have you try mounting one of the other partitions like root or
opt?Root is slice 0, opt slice
7.Mark--------------------------------------------------------> From:
kashifijaz93@xxxxxxxxxxx> To: foxboro@xxxxxxxxxxxxx> Subject: Re:
[foxboro] WP51A Restore problem> Date: Sat, 8 Mar 2008 14:04:41 +0500> >
After booting from the CDROM> , when I type> > #mount /dev/dsk/c0t3d0s6
/mnt> > It gives me error> > mount:warning:line for "Segmentation Fault>
> Can you explain this.> > Regards,> > Kashif Ijaz> INTECH Process
Automation> Subject: Re: [foxboro] WP51A Restore problem> Date: Thu, 6
Mar 2008 12:19:55 -0500> From: mark.gardner@xxxxxxxxxxxxxxxx> To:
foxboro@xxxxxxxxxxxxx> > I assume your referring to the internal hard
disk of a 51B Sparc 5> workstation. The "c0t3d0" is the correct SCSI
address for the system> Hard drive. Refer to document B0193ND, table
2-18 specifies the> AP/AW Hard Drive Partitioning Conventions. =3D> > > If
you want to mount "c0t3d0s6" which maps to the "/usr
"> File system after you have booted from CDROM try:> # mount
/dev/dsk/c0t3d0s6 /mnt> Mark Gardner> > -----Original Message----->
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx]> On Behalf Of Kashif Ijaz> Sent:
Thursday, March 06, 2008 11:45 AM> To: foxboro@xxxxxxxxxxxxx> Subject:
Re: [foxboro] WP51A Restore pr> oblem> > Dear all> > This hard disk is
being recognized by "probe-scsi-all" command on ok =3D3D> prompt.> Can it
be that the SCSI address on the hard disk is wrongly set.> Right =3D3D>
now> "probe-scsi-all" is giving me the hard disk on Target 3 unit 0. May
be =3D3D> in> the earlier backup the device was on another SCSI address.>
> How to change the SCSI target address setting on the hard disk. Also
how> =3D3D> can> I mount the hard disk after boot up from the CDROM. Where
I have to look> =3D3D> at> in the hard disk file where the SCSI setting
are like /dev/dsk/c0t3d0s6> > Regards,> > Kashif Ijaz> INTECH Process
Automation> > > > Kashif Ijaz <kashifija
z93@xxxxxxxxxxx> wrote:> >=3D3D20> > We had 3 dd backup tapes taken at
different times of WP51A having 1.05> =3D3D> =3D3D3D> > GB> > tape by
following command. The machine was running I/A version 4.3.> >=3D3D20> >
dd if=3D3D3D3D/dev/rsd0c of=3D3D3D3D/dev/rst0 bs=3D3D3D126b> >=3D3D20> > No=
w I
have found the same machine and put a 1.05 GB (similar) hard =3D> 3D>
disk=3D3D20> > =3D3D3D> > in> > it. Booted up the system by 4.1 DAY 0 CDROM=
(as 4.3 Day 0 was not =3D3D3D> > booting up> > the machine) and restored
the system by followin> g drives> >=3D3D20> > dd if=3D3D3D3D/dev/rst0
of=3D3D3D3D/dev/rsd0c bs=3D3D3D3D126b> >=3D3D20> > It is doing so successfu=
lly
as the indicated message=3D3D3D20> >=3D3D20> > 16,288 records out> > 16,288=
records in> >=3D3D20> > I have already connected the Ethernet port and
Serial port A to the =3D3D> =3D3D3D> > powered> > up DNBI having the
letterbug (61WP32, as this the logical name of the> > station). Because
I believe that WP51A will only boot up properly to =3D3D> =3D3D3D> >
Foxboro> > shell if
it is connected to DNBI as it cannot boot up in standalone =3D3D> =3D3D3D=
>
> mode.> >=3D3D20> > But while booting it gives following messages>
>=3D3D20> > Hostname : 61WP32> > mount : /dev/dsk/c0t3d0s6. no such
device> > /sbin/swapadd : expr: not found> > /sbin/swapadd :
/usr/sbin/swap : not found> > WARNING : /usr/sbin/fsck not found
...........> ..........=3D3D3D20> >=3D3D20> > And goes to ok prompt> >=3D3D=
20>
> Can you answer following question> >=3D3D20> > 1- Why the WP51A is not
booting from version 4.3 Day 0 CD (I =3D3D> > have> > tried 3 different
CDs). This machine was originally having version 4.3> > installed on
it.> > 2- It is booting from version 4.1 Day 0 CD. Is this machine> >
compatible only with version 4.1> > 3- Do WP51A needs to be connected to
it's DNBI while booting> > 4- Is it not recognizing the hard disk(
because of message =3D3D> =3D3D3D> > "mount :> > /dev/dsk/c0t3d0s6. no such=
device"). When in ok prompt =3D3D> "probe-scsi-all"=3D3D20> > =3D3D3D> > is=
> >
showing the hard disk
as Target 3 unit 0 Disk SEAGATE ST31200N> > SUN1.0587220093789>
>=3D3D20> > I have the commit disk but since the WP51A is not booting from
the 4.3> =3D3D> =3D3D3D> > Day 0> > CD, I cannot "ia_install" it. While
booting it is giving spurious =3D3D> errors> > like Bad trap, memory
alignment, core dump. What is the reason for =3D3D> such> > errors.> >=3D3>=
D20> > Can you see if there is some Foxboro expert within CSC
experienced in> =3D3D> =3D3D3D> > WP51A,> > version 4.3 and "dd" command.>
>=3D3D20> > Regards,> > Kashif Ijaz> > INT> ECH Process Automation>
>=3D3D20> >=3D3D20> > =3D3D20> > =3D3D20> > =3D3D>
_______________________________________________________________________>
> This mailing list is neither sponsored nor endorsed by Invensys =3D3D>
Process> > Systems (formerly The Foxboro Company). Use the info you
obtain here =3D3D> at> > your own risks. Read =3D3D>
http://www.thecassandraproject.org/disclaimer.html> > =3D3D20> > foxboro
mailing list: =3D3D> //www.freelists.org/list/foxboro> > to subscribe
: =3D3D> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Djoin> > to
unsubscribe: =3D3D>
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Dleave> >> =3D3D20> =3D3D=
20>
_______________________________________________________________________>
This mailing list is neither sponsored nor endorsed by Invensys Process>
Systems (formerly The Foxboro Company). U> se the info you obtain here
at> your own risks. Read
http://www.thecassandraproject.org/disclaimer.html> =3D3D20> foxboro
mailing list: //www.freelists.org/list/foxboro> to> subscribe: =3D3D>
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Djoin> to unsubscribe:
=3D3D> mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Dleave> =3D3D20> >=
=3D>
> =3D> >
_______________________________________________________________________>
This mailing list is neither sponsored nor endorsed by Invensys Process>
Systems (formerly The Foxboro Company). Use the info you obtain here at>
your own risks. Read http://www.thecassandraproject.org/disclaimer.html>
=3D> > f
oxboro mailing list: //www.freelists.org/list/foxboro> to
subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin> to
unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave> =3D> >=
> > * Confidentiality Notice:> This e-mail and any associated files are
intended solely for the individual=3D> or entity to whom they are
addressed> . Please do not copy it or use it for =3D> any purposes, or
disclose its contents to any other person. Further, this e=3D> -mail and
any associated files may be confidential and fu> rther may be legal=3D> ly
privileged. This email is from the Invensys Process Systems business
uni=3D> t of Invensys plc which is a company registered in England and
Wales with i=3D> ts registered office at Portland House, Bressenden Place,
London, SW1E 5BF =3D> (Registered number 166023). For a list of European
legal entities within t=3D> he Invensys Process Systems business group,
please click here http://www.in=3D <http://www.in=3D/> >
vensys.com/legal/default.asp?top_
nav_id=3D3D77&nav_id=3D3D80&prev_id=3D3D77.> > If you have received this
e-mail in error, you are on notice of its status.=3D> Please notify us
immediately by reply e-mail and then delete this message =3D> from your
system. Thank you for your co-operation. You may contact our Help=3D> desk
on +44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx T>
=3D> his e-mail and a> ny attachments thereto may be subject to the terms
of any a=3D> greements between Invensys (and/or its subsidiaries and
affiliates) and the=3D> recipient (and/or its subsidiaries and>
affiliates).> > > > >
_______________________________________________________________________>
This mailing list is neither sponsored nor endorsed by Invensys Process>
Systems (formerly The Foxboro Company). Use the info you obtain here at>
your own risks. Read http://www.thecassandraproject.org/disclaimer.html>
> foxboro mailing list: //www.freelists.org/list/foxboro> to
subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dj
oin> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave> >
_________________________________________________________________>
Express yourself instantly with MSN Messenger! Download today it's
FREE!> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/>
> >
_______________________________________________________________________>
This mailing l> ist is neither sponsored nor endorsed by Invensys
Process> Systems (formerly The Foxboro Company). Use the info you obtain
here at> your own risks. Read
http://www.thecassandraproject.org/disclaimer.html> > foxboro mailing
list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave>>
_________________________________________________________________>
Discover the new Windows Vista>
http://search.msn.com/results.aspx?q=3Dwindows+vista&mkt=3Den-US&form=3DQBR=
E>
> > ______________________________________
_________________________________> This mailing list is neither
sponsored nor endorsed by Invensys Process> Systems (formerly The
Foxboro Company). Use the info you obtain here at> your own risks. Read
http://www.thecassandraproject.org/disclaimer.html> > foxboro mailing
list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave> > > > > > > *
Confidentiality Notice:> This e-mail and any associated files are
intended solely for the individual or entity to whom they are addressed.
Please do not copy it or use it for any purposes, or disclose its
contents to any other person. Further, this e-mail and any associated
files may be confidential and further may be legally privileged. This
email is from the Invensys Process Systems business unit of Invensys plc
which is a company registered in England and Wales with its registered
office at Portland House, Bressenden
Place, London, SW1E 5BF (Registered number 166023). For a list of
European legal entities within the Invensys Process Systems business
group, please click here
http://www.invensys.com/legal/default.asp?top_nav_id=3D77&nav_id=3D80&prev_=
i
d=3D77.> > If you have received this e-mail in error, you are on notice of
its status. Please notify us immediately by reply e-mail and then delete
this message from your system. Thank you for your co-operation.. You may
contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email
inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto
may be subject to the terms of any agreements between Invensys (and/or
its subsidiaries and affiliates) and the recipient (and/or its
subsidiaries and affiliates).> > > -- No attachments (even text) are
allowed --> -- Type: application/ms-tnef> -- File: winmail.dat> > > > >
_______________________________________________________________________>
This mailing list is neither sponsored nor endorsed by Inve
nsys Process> Systems (formerly The Foxboro Company). Use the info you
obtain here at> your own risks. Read
http://www.thecassandraproject.org/disclaimer.html> > foxboro mailing
list: //www.freelists.org/list/foxboro> to subscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin> to unsubscribe:
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave> =
_________________________________________________________________
Discover the new Windows Vista
http://search.msn.com/results.aspx?q=3Dwindows+vista&mkt=3Den-US&form=3DQBR=
E
=
=
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=
* Confidentiality Notice:
This e-mail and any associated files are intended solely for the individual=
or entity to whom they are addressed. Please do not copy it or use it for =
any purposes, or disclose its contents to any other person. Further, this e=
-mail and any associated files may be confidential and further may be legal=
ly privileged. This email is from the Invensys Process Systems business uni=
t of Invensys plc which is a company registered in England and Wales with i=
ts registered office at Portland House, Bressenden Place, London, SW1E 5BF =
(Registered number 166023). For a list of European legal entities within t=
he Invensys Process Systems business group, please click here http://www.in=
vensys.com/legal/default.asp?top_nav_id=3D77&nav_id=3D80&prev_id=3D77.
If you have received this e-mail in error, you are on notice of its status.=
Please notify us immediately by reply e-mail and then delete this message =
from your system. Thank you for your co-operation. You may contact our Help=
desk on +44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx T=
his e-mail and any attachments thereto may be subject to the terms of any a=
greements between Invensys (and/or its subsidiaries and affiliates) and the=
recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
