Re: [foxboro] ICCAPI error
- From: Duc M Do <duc@xxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Mon, 28 Aug 2006 21:33:09 -0400
At 09:32 AM 8/29/06 +1200, Kevin FitzGerrell wrote:
>
>Duc,
>
>ICCAPI says this is a "class= 1" error which means IPC error.
>
>IPC error= -29 is "abortion of connect request" (see E_ABORT_CON in the IPC
>manual). The messages says c_chkio error, but I would guess that the error
>originated with a c_send or c_receive call.
Kevin,
Thanks for the elucidation (though you lost me after the first sentence).
I don't understand the error message (okay, hold the laughter!) since
we can load this compound into an off-line CP without any problem, yet
cannot load it into an FSim simulator. I've sent it to my technical
contact at SimSci-Esscor and we'll wait to see what she has to say.
My original question still remains, and that is where I can find a list
of error messages for ICCAPI (other than the terse listing in iccapi.h,
thanks, David!) that also has some explanation for the errors. They are
not in the ICCAPI document, obviously.
Regards,
Duc
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
