Re: [foxboro] FOXDRAW HELP PLEASE....

  • From: RAKESH DASH <rakeshinxs@xxxxxxxxx>
  • To: foxboro@xxxxxxxxxxxxx
  • Date: Fri, 19 Dec 2014 17:42:19 +0530

There are 3 foxview screen opened by operator. He keeps toggling between
screens. I want to send this popup to open in the screen which is currently
seen by operator. Or I open this in each instance & by some means close all
3 popup if he closes one.
Rgds,
Rakesh
On Dec 18, 2014 2:08 PM, "Dirk Pauwels" <dirk.pauwels@xxxxxxxxxx> wrote:

> Hi Rakesh,
>
> You can use foxdraw/file/display properties/overlay to control the
> behavior of your overlay. You can have several overlays on top of each
> other and moveable/sizeable without closing the underlaying overlays.
> Also you can off course use display commands to set the position of the
> overlay, like: "ov /opt/disp/ovl/Agit_SLURRY -l 200,0 -ontop" will open
> Agit_Slurry on the top left side and on top of everything else..... etc....
>
> What we also do a lot of the times is not use an overlay but an object in
> the display with visibility connected to certain conditions, this way the
> "operator selection Yes/No" (ie) opens in the original window.
>
> Rgds,
> Dirk
>
>
> -----Oorspronkelijk bericht-----
> Van: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> Namens RAKESH DASH
> Verzonden: donderdag 18 december 2014 5:01
> Aan: foxboro@xxxxxxxxxxxxx
> Onderwerp: Re: [foxboro] FOXDRAW HELP PLEASE....
>
> Alex,
> I am able to overlay the screen as you suggested. Can I also open a popup
> instead overlay ? I would like to open a popup in the corner of the screen.
> Please help.
> Rgds,
> Rakesh
> On May 17, 2012 11:47 PM, "Johnson, Alex P (IOM)" <
> Alex.Johnson@xxxxxxxxxxxx>
> wrote:
>
> > Re: Message Box
> > Yep. It's an overlay. I used to do it all the time.
> >
> > The "main" button uses the ov command to raise an overlay. The overlay
> > has two buttons "Confirm" and "Cancel." Cancel closes the overlay.
> > Confirm does whatever
> >
> > Regards,
> >
> > Alex Johnson
> > Invensys Operations Management
> > 10900 Equity Drive
> > Houston, TX 77041
> > +1 713 329 8472 (desk)
> > +1 713 329 1600 (operator)
> > +1 713 329 1700 (Central Fax)
> > alex.johnson@xxxxxxxxxxxx
> >
> >
> > *** Confidentiality Notice: This e-mail, including any associated or
> > attached files, is intended solely for the individual or entity to
> > which it is addressed. This e-mail is confidential and may well also
> > be legally privileged. If you have received it in error, you are on
> > notice of its status. Please notify the sender immediately by reply
> > e-mail and then delete this message from your system. Please do not
> > copy it or use it for any purposes, or disclose its contents to any
> > other person. This email comes from a division of the Invensys Group,
> > owned by Invensys plc, which is a company registered in England and
> > Wales with its registered office at 3rd Floor, 40 Grosvenor Place,
> London, SW1X 7AW (Registered number 166023).
> > For a list of European legal entities within the Invensys Group,
> > please go to http://www.invensys.com/en/legal/default.aspx.
> >
> > You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
> > reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be
> > subject to the terms of any agreements between Invensys (and/or its
> > subsidiaries and affiliates) and the recipient (and/or its
> > subsidiaries and affiliates).
> >
> >
> >
> >
> > ______________________________________________________________________
> > _ This mailing list is neither sponsored nor endorsed by Invensys
> > Process Systems (formerly The Foxboro Company). Use the info you
> > obtain here at your own risks. Read
> > http://www.thecassandraproject.org/disclaimer.html
> >
> > foxboro mailing list:             //www.freelists.org/list/foxboro
> > to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> > to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
> >
> >
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             //www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
> ________________________________
> Lawter Notice: The information (including any attachments) contained in
> this communication is confidential, private and proprietary, may be
> privileged or otherwise protected by applicable law or legal rule, and is
> intended only for the use of the addressee(s). Unauthorized use,
> disclosure, distribution or copying is strictly prohibited and may be
> unlawful. If you have received this communication in error, please notify
> the sender immediately by reply e-mail, or by calling the sender, and then
> delete it completely from your system.
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list:             //www.freelists.org/list/foxboro
> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             //www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts:

  1. Home
  2. foxboro
  3. Archive
  4. 12-2014