Thanks, were you able to prove it was fixed with firmware?
Brian
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Prakash I.G.
Sent: Friday, January 22, 2016 8:04 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AOUT Issue
Hi
We had faced same problem in Hart Modules. Need to upgrade firmware.
Prakash G
On 21 Jan 2016 9:53 pm, "Brian Long" <blong@xxxxxxx> wrote:
We had an AOUT block go into HOLD for some unknown reason, caused uscome out
some down time. No matter what was tried (in SELECT) block would not
of HOLD, nothing addressed to it, no SEQ code, etc. Going to ICC and//www.freelists.org/list/foxboro
doing a DONE fixed, did not have to do DELETE/UNDELETE. This was not
new config, no system changes or updates were done. This is a CP270
lightly loaded.
Anyone else seen anything like this before? This actually has us very
concerned.
Thanks in advance,
Brian Long
______________________________________________________________________
___ This mailing list is neither sponsored nor endorsed by Schneider
Electric (formerly The Foxboro Company). Use the info you obtain here
at your own risks. See the disclaimer at
www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
to subscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave