We have got ROUTs after the AOUTs when we upgraded from 100 series FBMs to 200
series FBMs, for HART so we did not have any problems so far reported here. We
also have AOUTs however not connected using HART, use 4-20
Regards,
Srini
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of G.Macdonald@xxxxxxxxx
Sent: Wednesday, January 27, 2016 11:12 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AOUT Issue
Not sure what you mean by OCD?
For a new installation, agreed you would tie the PIDA directly to the ROUT so
the propagation works correctly. For upgrading non-hart FBM's to hart FBM's,
replacing AOUT's with ROUT's becomes a significant amount of work (graphics,
config, testing, recomissioning each loop) making the justification difficult.
Much easier to just add the ROUT after the AOUT.
Having a hart malfunction cause the 4-20 to stop working makes the importance
of the propagation critical.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Landry, Scott
Sent: Tuesday, January 26, 2016 9:43 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AOUT Issue
Every project I've ever been involved in did not use AOUT blocks at all,
replaced with ROUT when ECB201 (hart FBMs) with 4-20 or Hart was involved
Have you tried OCD ?
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list:
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.freelists.org_list_foxboro&d=CwIDAg&c=zgHsTqBQkGAdNuoPRxUzSQ&r=k7AF9dsAUnHrqp5ddRhLBXpnci0j0uVlauIdM6flLFM&m=Ys-sM5XmTcvIw3pBo3HFTEisb1wszojSDo0Pyez6QW0&s=TO4qclIzFS-h2_J7bq5W2ZfXF0YychjrJLqXsYuqFsY&e=
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
For more information on Agrium’s E-Mail Policy or to unsubscribe, click here:
http://www.agrium.com/email_footer_en.jsp
Pour plus de renseignements sur la politique de courrier électronique d’Agrium
ou pour vous désabonnez, cliquez ici : http://www.agrium.com/email_footer_fr.jsp
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
