I always used it but from memory wasn't it an all or none choice for blocks;
i.e., all AINs, all PIDs, etc. and all the same configuration
parameters/block. There is some other filtering (Compounds/Blocks) but that
just adds more time to the task. It was still a starting point for me, just
had to do some Modifys later...
Joseph M. Riccardi
386-451-7607 Cell
Joe@xxxxxxxxxxxxx
"To give real service you must add something that cannot be bought or
measured with money; and that is sincerity and integrity." - Donald A. Adams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Boulay, Russ
Sent: Tuesday, February 2, 2016 4:30 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AIM historian
Doesn't anyone just use the histcfg browse feature?
AIMAPI server finds all your compounds and blocks and allows selection by
filtering...
Can build a 2000 point historian in like 15 minutes .....
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Stankiewicz, Anthony P.
Sent: Tuesday, February 02, 2016 1:11 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] AIM historian
Kevin,
Below is an example of a point from the file created when doing an export
(Save Configuration) from the AimHistorian (histmgr) program under Tools
1 CREATE POINT 1BCWP:AFH.BO02
1 PUT POINT 1BCWP:AFH.BO02 TYPE BOOLEAN
DESC =
AUDITUPD = NO
COLLECTOR = hist01
COLMETH = CONNECTED
ENGUNITS =
EXPORT = NO
FFREQUNITS = SECONDS
FASTFREQ = 1
HIRANGE = 1.00000000
INITSTATE = ON
LORANGE = 0.00000000
MXSAMUNITS = SECONDS
MXSAMTIME = 3600
NAMEINCOL = 1BCWP:AFH.BO02
NUMELEMS = 1
READDELTA = 0.50000000
RSTRTSTATE = PREVIOUS
SFREQUNITS = SECONDS
SLOWFREQ = 1
SIZE = 4
TRGCHANGE = NO
You could create an input file to be batched in. It would need to be like
above or below is an example of adding points with the fields you might
modify, the rest are default.
This is from a .inp file. hist01 is the name of our historian. Your
historian name would go in those places.
0 CREATE SESSION hist01 SESKEY hist01 1
1 CREATE POINT 1PULSE:PCAIN_A.PNT;TYPE=3;DESC="1A FEEDER RATE";
COLLECTOR=hist01;COLMETH=2;LORANGE=0.000000;HIRANGE=72.000000;
READDELTA=0.5;FASTFREQ=4;FFREQUNITS=2;SLOWFREQ=4;SFREQUNITS=2;
1 CREATE POINT 1_480V:CC230.CIN;TYPE=5;DESC="480V BUS 1A GROUND ALARM";
COLLECTOR=hist01;COLMETH=2;RSTRTSTATE=2;INITSTATE=1;
READDELTA=0.5;FASTFREQ=2;FFREQUNITS=2;SLOWFREQ=2;SFREQUNITS=2;
1 DEL SESSION hist01 SESKEY hist01 commit exit
Modify for all your points and batch in using histbatch. It is labeled Batch
Configurator under the Tools menu in the AimHistorian.
Caution - Always do the Save Configuration (histsave) first so that you have
a complete export of the historian just in case.
Tony Stankiewicz
Southern Company Services
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Kevin Rhodes
Sent: Monday, February 01, 2016 2:13 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] AIM historian
Anyone know of a quick way to bulk build 2000 tags in AIM historian?
Kevin Rhodes
Sr. Process Control Engineer
[cid:image003.jpg@01CF3966.B2A15A40]
1301 McKinney St. Suite 2200
Houston, Tx 77010
713.739.3267 Office
281.787.1730 Cell
kevin.rhodes@xxxxxxxxxx<mailto:kevin.rhodes@xxxxxxxxxx>
[EnLink Midstream]
NYSE: ENLK (MLP), ENLC (GP)
________________________________
Confidentiality Warning: This message and any attachments are intended only
for the use of the intended recipient(s), are confidential, and may be
privileged. If you are not the intended recipient, you are hereby notified
that any review, retransmission, conversion to hard copy, copying,
circulation or other use of all or any portion of this message and any
attachments is strictly prohibited. If you are not the intended recipient,
please notify the sender immediately by return e-mail, and delete this
message and any attachments from your system.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which it
is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
