Dear list, We have an offline test system: Nodebus: AW51E, running I/A 6.3, CP60, COM30, FBM200 series including ATS ! Mesh, Terminal Server windows 2003, I/A 8.2, FCP270, FBM231, Mesh switches etc. Today I was configuring blocks with ICC on the Mesh system and tried to copy a block from the node-bus system by entering the COMPND:BLOCK name in the block-type field. It did show the correct block type of the source block but then seemed to freeze. After some time (I guess a time-out) I got an error message and the block was not copied. My question: Should it be possible to copy blocks in this way from node system to mesh? If so, what am I doing wrong? I do not have other problems (that I know of) with the ATS link between node part and Mesh part, it seems to work fine! Kind regards, Patrick Martens Total Raff. Nederland N.V. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave