Re: [foxboro] Copying control blocks from node to Mesh
- From: "Goldie, Shaun S" <Shaun.Goldie@xxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Wed, 16 May 2007 07:01:08 +1200
Short answer is no
Long answer is no
You cannot ICC from one side to the other we have been using iccdrvr and
ftp to move blocks from a CP30 to the Mesh side FCP=20
Shaun
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Pat Martens
Sent: Wednesday, 16 May 2007 05:10
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Copying control blocks from node to Mesh
Dear list,
=20
We have an offline test system:
=20
Nodebus:
AW51E, running I/A 6.3, CP60, COM30, FBM200 series including ATS !
=20
Mesh,
Terminal Server windows 2003, I/A 8.2, FCP270, FBM231, Mesh switches
etc.=20
=20
Today I was configuring blocks with ICC on the Mesh system and tried to
copy a block from the node-bus system by entering the COMPND:BLOCK name
in the block-type field.
=20
It did show the correct block type of the source block but then seemed
to freeze.
After some time (I guess a time-out) I got an error message and the
block was not copied.
=20
My question:
Should it be possible to copy blocks in this way from node system to
mesh?
If so, what am I doing wrong?
=20
I do not have other problems (that I know of) with the ATS link between
node part and Mesh part, it seems to work fine!
=20
Kind regards,
=20
Patrick Martens
Total Raff. Nederland N.V.
=20
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
=0A=0ANOTICE - This message and any attached files may contain informatio=
n that is confidential and intended only for use by the intended recipien=
t. If you are not the intended recipient or the person responsible for de=
livering the message to the intended recipient, be advised that you have =
received this message in error and that any dissemination, copying or use=
of this message or attachment is strictly forbidden, as is the disclosur=
e of the information therein. If you have received this message in error =
please notify the sender immediately and delete the message.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
