Alle 09:30, venerdì 24 gennaio 2003, hai scritto: > > [root@desktop tino]# dmesg| grep eth0 > > eth0: RealTek RTL8129 at 0xd4962000, ff:ff:ff:ff:ff:ff, IRQ 11 > > [cut] > > > eth0: RealTek RTL8129 at 0xd48e3000, ff:ff:ff:ff:ff:ff, IRQ 11 > > Uhm, perché ci sono due indirizzi di memoria diversi? > E soprattutto, perché entrambe le entry hanno quel MAC address? > Non credo che tu, sul desktop, abbia due schede di rete e non te ne sia mai > accorto. Dai non può essere.... l'ho uso da 3 anni... lo escludo... > Prova a postare l'output di dmesg subito dopo un reboot della macchina, con > cavo di rete staccato, così evitiamo che eventuali pacchetti che se ne > vanno a spasso al boot inquinino la cache arp. Ok! l'output è allegato nel file dmesg.txt > > inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0 > Qui la faccenda si incasina: ma l'interfaccia non aveva indirizzo > 192.168.1.2? Da dove esce fuori il .5? Niente lascia perdere... l'output che ti ho postato riguarda ad una configurazione di prova... la macchina è tornata ad essere la .1 :))) > Seriamente, forse è una stupidaggine, ma sei sicuro di non averne due di > schede di rete? > Magari una è integrata nella motherboard e non te ne sei accorto. > Lo chiedo perché a me è successo e sono diventato matto per capire dove > stesse il problema. :)) ma .... non so cosa dire... ma peggio ancora... non so dove cercarla! :( Saluti e grazie mille Tino
Linux version 2.4.18-6mdk (quintela@xxxxxxxxxxxxxxxxxxx) (gcc version 2.96 20000731 (Mandrake Linux 8.2 2.96-0.76mdk)) #1 Fri Mar 15 02:59:08 CET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) hm, page 0fff0000 reserved twice. On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Linux_MDF_8.2 ro root=303 quiet devfs=mount hdc=ide-scsi ide_setup: hdc=ide-scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 598.853 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1196.03 BogoMIPS Memory: 255444k/262080k available (1170k kernel code, 6248k reserved, 332k data, 260k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183fbff c1c3fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c3fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 01 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [1022/7006] at 00:00.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized devfs: v1.10 (20020120) Richard Gooch (rgooch@xxxxxxxxxxxxx) devfs: boot_options: 0x1 vesafb: framebuffer at 0xd0000000, mapped to 0xd0800000, size 65536k vesafb: mode is 800x600x16, linelength=1600, pages=67 vesafb: protected mode interface info at c000:5336 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 53754 bytes). Console: switching to colour frame buffer device 80x16 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7409: IDE controller on PCI bus 00 dev 39 AMD7409: chipset revision 3 AMD7409: not 100% native mode: will probe irqs later AMD7409: disabling single-word DMA support (revision < C4) ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALLP LM15, ATA DISK drive hdc: LITE-ON LTR-12101B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 29336832 sectors (15020 MB) w/1900KiB Cache, CHS=1826/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Uncompressing....done. Freeing initrd memory: 73k freed EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Freeing unused kernel memory: 260k freed Real Time Clock Driver v1.10e Adding Swap: 200804k swap-space (priority -1) SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITE-ON Model: LTR-12101B Rev: LS38 Type: CD-ROM ANSI SCSI revision: 02 MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 8139too Fast Ethernet driver 0.9.24 eth0: RealTek RTL8129 at 0xd4962000, ff:ff:ff:ff:ff:ff, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139B' eth0: No MII transceivers found! Assuming SYM transceiver. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xd497a000, IRQ 9 usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-756 [Viper] USB usb-ohci.c: AMD756 erratum 4 workaround usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 4 ports detected hub.c: USB new device connect on bus1/1, assigned device number 2 usb.c: USB device 2 (vend/prod 0x43d/0x21) is not claimed by any active driver. usb.c: registered new driver usblp usb.c: ignoring set_interface for dev 2, iface 0, alt 0 printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 printer.c: v0.8:USB Printer Device Class driver parport0: PC-style at 0x378 [PCSPP,TRISTATE] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: ipvs loaded. eth0: Setting half-duplex based on auto-negotiated partner ability 0000. parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). es1371: version v0.30 time 03:23:01 Mar 15 2002 es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08 es1371: found es1371 rev 8 at io 0xe800 irq 9 es1371: features: joystick 0x0 ac97_codec: AC97 Audio codec, id: 0x4352:0x5913 (Cirrus Logic CS4297A rev A) lp0: compatibility mode lp0: compatibility mode lp0: compatibility mode Splash status on console 0 changed to off