[FLUG] Re: Help Network

  • From: Tino <giros@xxxxxxxxx>
  • To: fanolug@xxxxxxxxxxxxx
  • Date: Thu, 23 Jan 2003 21:11:48 +0100

Mailing List del Fortunae LUG
=============================

Alle 13:04, giovedì 23 gennaio 2003, hai scritto:

> > ? (192.168.1.2) at FF:FF:FF:FF:FF:FF [ether] on eth0
>
> Qui c'e' qualche problema, questo mac non e' valido in una arp table.
> Che scheda eth e' ? Posta l'output di dmesg relativo.

dovrebbe essere una RealTek Coreco RTL-8129

[root@desktop tino]# dmesg| grep eth0
eth0: RealTek RTL8129 at 0xd4962000, ff:ff:ff:ff:ff:ff, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139B'
eth0: No MII transceivers found!  Assuming SYM transceiver.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: RealTek RTL8129 at 0xd48e3000, ff:ff:ff:ff:ff:ff, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8139B'
eth0: No MII transceivers found!  Assuming SYM transceiver.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.


> E anche di ifconfig.

eth0      Link encap:Ethernet  HWaddr FF:FF:FF:FF:FF:FF
          inet addr:192.168.1.5  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:3052 (2.9 Kb)
          Interrupt:11 Base address:0x3000

>
> Sarebbe veramente utile l'output di tcpdump durante un ping -c 1 (e arp
> cache vuota).

Non vorrei dire una cacchiata, anche perche mi sembra che la stò per 
dire..... ma non arriva niente  :)

Grazie mille 

Stefano
--
<simon> vabbè dai raga... reinstallo linux

Other related posts: