RE: relay problem ?

Messageno, i'm using outlook express and logon to domain account (not using 
owa).  and i think kimglass.com isn't blocked.  i still can send email to 
another domain, but have try for kimglass.com several times and can not send to 
that domain.

----- Original Message ----- 
  From: Jamie A. Byrnes 
  To: [ExchangeList] 
  Sent: Wednesday, August 27, 2003 9:30 AM
  Subject: [exchangelist] RE: relay problem ?


  http://www.MSExchange.org/


  This is a multi-part message in MIME format.



------------------------------------------------------------------------------


  did you send this test using OWA or logged on to a domain account on the LAN? 
Rather than being a problem with the kimglass.com server it appears to be a 
problem with your authentication to your own server.

  One other possible cause might be if you are using RBL blocking and the 
kimglass.com domain is on the list. If you don't know what RBL is then it isn't 
the problem.


  Jamie.

    -----Original Message-----
    From: Hery [mailto:hery@xxxxxxxxxxxxxx] 
    Sent: Wednesday, 27 August 2003 11:44 AM
    To: [ExchangeList]
    Subject: [exchangelist] RE: relay problem ?


    http://www.MSExchange.org/

    hi jamie, here the error :

    ------------------------------------------------------
    Your message
      To:      info@xxxxxxxxxxxx
      Subject: test email
      Sent:    Wed, 27 Aug 2003 09:00:52 +0700

    did not reach the following recipient(s):
    info@xxxxxxxxxxxx on Wed, 27 Aug 2003 09:07:58 +0700
        You do not have permission to send to this recipient.  For
    assistance, contact your system administrator.
        <server.pintumas.co.id #5.7.1 smtp;550 5.7.1 Unable to relay for
    info@xxxxxxxxxxxx>
    ------------------------------------------------------

    rgds,
    hery
      ----- Original Message ----- 
      From: Jamie A. Byrnes 
      To: [ExchangeList] 
      Sent: Wednesday, August 27, 2003 6:33 AM
      Subject: [exchangelist] RE: relay problem ?



      Hi Hery,

      It would appear that you are trying to test the connection from your own 
mail server via telnet - you can't do that with relaying disabled, although it 
may be possible with the AUTH command, haven't tried it.

      More important would be the NDR. What was the error code, ie. 5.5.1 etc.

      Jamie.
    ------------------------------------------------------
    List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
    Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
    Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
    ------------------------------------------------------
    Other Internet Software Marketing Sites:
    Leading Network Software Directory: http://www.serverfiles.com
    No.1 ISA Server Resource Site: http://www.isaserver.org
    Windows Security Resource Site: http://www.windowsecurity.com/
    Network Security Library: http://www.secinf.net/
    Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
    ------------------------------------------------------
    You are currently subscribed to this MSExchange.org Discussion List as: 
jabyrnes@xxxxxxxxxxxxxxxxx
    To unsubscribe send a blank email to $subst('Email.Unsub') 


------------------------------------------------------------------------------


  ------------------------------------------------------
  List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
  Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp
  Exchange FAQ: http://www.msexchange.org/pages/larticle.asp?type=FAQ
  ------------------------------------------------------
  Other Internet Software Marketing Sites:
  Leading Network Software Directory: http://www.serverfiles.com
  No.1 ISA Server Resource Site: http://www.isaserver.org
  Windows Security Resource Site: http://www.windowsecurity.com/
  Network Security Library: http://www.secinf.net/
  Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
  ------------------------------------------------------
  You are currently subscribed to this MSExchange.org Discussion List as: 
hery222@xxxxxxxxxx
  To unsubscribe send a blank email to $subst('Email.Unsub')

Other related posts: