RE: relay problem ?

  • From: "Jamie A. Byrnes" <jabyrnes@xxxxxxxxxxxxxxxxx>
  • To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
  • Date: Wed, 27 Aug 2003 12:00:00 +0930

did you send this test using OWA or logged on to a domain account on the
LAN? Rather than being a problem with the kimglass.com server it appears
to be a problem with your authentication to your own server.
 
One other possible cause might be if you are using RBL blocking and the
kimglass.com domain is on the list. If you don't know what RBL is then
it isn't the problem.
 
 
Jamie.
 

        -----Original Message-----
        From: Hery [mailto:hery@xxxxxxxxxxxxxx] 
        Sent: Wednesday, 27 August 2003 11:44 AM
        To: [ExchangeList]
        Subject: [exchangelist] RE: relay problem ?
        
        
        http://www.MSExchange.org/
        
        hi jamie, here the error :
         
        ------------------------------------------------------
        Your message
          To:      info@xxxxxxxxxxxx
          Subject: test email
          Sent:    Wed, 27 Aug 2003 09:00:52 +0700
        
        did not reach the following recipient(s):
        info@xxxxxxxxxxxx on Wed, 27 Aug 2003 09:07:58 +0700
            You do not have permission to send to this recipient.  For
        assistance, contact your system administrator.
            <server.pintumas.co.id #5.7.1 smtp;550 5.7.1 Unable to relay
for
        info@xxxxxxxxxxxx>
        ------------------------------------------------------
         
        rgds,
        hery

                ----- Original Message ----- 
                From: Jamie A. Byrnes
<mailto:jabyrnes@xxxxxxxxxxxxxxxxx>  
                To: [ExchangeList] <mailto:exchangelist@xxxxxxxxxxxxx>  
                Sent: Wednesday, August 27, 2003 6:33 AM
                Subject: [exchangelist] RE: relay problem ?
                
                

                

                Hi Hery,
                 
                It would appear that you are trying to test the
connection from your own mail server via telnet - you can't do that with
relaying disabled, although it may be possible with the AUTH command,
haven't tried it.
                 
                More important would be the NDR. What was the error
code, ie. 5.5.1 etc.
                 
                Jamie.

        ------------------------------------------------------
        List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
        Exchange Newsletters:
http://www.msexchange.org/pages/newsletter.asp
        Exchange FAQ:
http://www.msexchange.org/pages/larticle.asp?type=FAQ
        ------------------------------------------------------
        Other Internet Software Marketing Sites:
        Leading Network Software Directory: http://www.serverfiles.com
        No.1 ISA Server Resource Site: http://www.isaserver.org
        Windows Security Resource Site: http://www.windowsecurity.com/
        Network Security Library: http://www.secinf.net/
        Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
        ------------------------------------------------------
        You are currently subscribed to this MSExchange.org Discussion
List as: jabyrnes@xxxxxxxxxxxxxxxxx
        To unsubscribe send a blank email to
$subst('Email.Unsub') 

Other related posts: