RE: ArcServer 2000 and Second Exchange 2000 Server
- From: "Chris McNally" <cmcnally@xxxxxxxxxxxxxxxxxxx>
- To: "[ExchangeList]" <exchangelist@xxxxxxxxxxxxx>
- Date: Thu, 6 Feb 2003 12:10:29 -0800
I'm close to tossing a hundred bucks their way for an anser ;-)
Thanks for your suggestions!
-----Original Message-----
From: Kim Vandegrift [mailto:kim.vandegrift@xxxxxxxxxxxxxxxx]
Sent: Thursday, February 06, 2003 12:08 PM
To: [ExchangeList]
Subject: [exchangelist] RE: ArcServer 2000 and Second Exchange
2000 Server
http://www.MSExchange.org/
That's a strange one. I just went to look at my backup job to
see if there were any properties on any of the exchange stuff that might
possibly have the chance to point to something other than the exchange
server intended and I can't find anything. Do you have support for
Arcserve you could call? This sounds like one of those times it's worth
it to burn an incident call.
-----Original Message-----
From: Chris McNally
[mailto:cmcnally@xxxxxxxxxxxxxxxxxxx]
Sent: Thursday, February 06, 2003 2:48 PM
To: [ExchangeList]
Subject: [exchangelist] RE: ArcServer 2000 and Second
Exchange 2000 Server
http://www.MSExchange.org/
Rather than trying in an existing job I've been trying
to do a straight on demand back up. He sees the server and recognizes it
as an Exchange server but doesn't find the mailboxes that are on that
particular server, it reverts to the original Exchange server.
~~
Chris McNally
Information Technology
Seating Concepts, LLC
San Diego, CA
619-491-3159
-----Original Message-----
From: Kim Vandegrift
[mailto:kim.vandegrift@xxxxxxxxxxxxxxxx]
Sent: Thursday, February 06, 2003 11:35 AM
To: [ExchangeList]
Subject: [exchangelist] RE: ArcServer 2000 and
Second Exchange 2000 Server
http://www.MSExchange.org/
Have you tried to remove the exchange server
from the backup job and repackage it. Then go back into the job and add
the server and repackage? With Arcserve I've solved problems with
recognizing servers before this way.
-----Original Message-----
From: Chris McNally
[mailto:cmcnally@xxxxxxxxxxxxxxxxxxx]
Sent: Thursday, February 06, 2003 1:02
PM
To: [ExchangeList]
Subject: [exchangelist] ArcServer 2000
and Second Exchange 2000 Server
http://www.MSExchange.org/
Hi all,
I moved off of my original Exchange box
to a new server. The move has gone relatively well but I can't get
Arcserve to recognize brick level or message store on the new Exchange
server, it only sees the mailboxes that are left on the original server.
I have done every combination I can think of for installation of client
licenses etc. but I just can't get the new Exchange box to drill down
for backups. When I drill down within Arcserve no matter which way I
approach the listings under mailboxes are the half dozen or so left on
the original server.
Any ideas?
------------------------------------------------------
List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters:
http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ:
http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site:
http://www.isaserver.org
Windows Security Resource Site:
http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions:
http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this
MSExchange.org Discussion List as: kim.vandegrift@xxxxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters:
http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ:
http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site:
http://www.isaserver.org
Windows Security Resource Site:
http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions:
http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this
MSExchange.org Discussion List as: cmcnally@xxxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters:
http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ:
http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site:
http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org
Discussion List as: kim.vandegrift@xxxxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=exchangelist
Exchange Newsletters:
http://www.msexchange.org/pages/newsletter.asp
Exchange FAQ:
http://www.msexchange.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
ISA Server Resource Site: http://www.isaserver.org
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this MSExchange.org Discussion
List as: cmcnally@xxxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
