Curtis,The only other thing you need to do is check to see that your Pro-60 is set to its default factory settings. To do this:
1. Take the embosser off line and go into the Service Menu by pressing 0.0E.
2. Perform the reset sequence as follows: 95E 96E 98E 99EThe embosser will exit the Service Menu and go back on line. The embosser will now be set to factory defaults, and all other things being equal, it should work.
Steve----- Original Message ----- From: "Curtis Jackson" <cjackson102@xxxxxxx>
To: <duxuser@xxxxxxxxxxxxx> Sent: Saturday, August 08, 2009 22:32 Subject: [duxuser] Re: margins
I'm using a Juliet pro 60 and the only ones I use are the document andglobal settings. Are their other settings I need to be setting. I also wantto know can you set manual page breaks? If so ho -----Original Message-----From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] OnBehalf Of Jo Taliaferro Sent: Saturday, August 08, 2009 8:03 AM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: margins Hi, So, when you set both the "document settings and the global settings,what other settings are you using with Duxbury? What braille embosser areyou using? Jo Taliaferro -----Original Message-----From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] OnBehalf Of Curtis Jackson Sent: Saturday, August 08, 2009 5:42 AM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: marginsWell I've got that set for 25 lines per page what do you think it should beset at -----Original Message-----From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] OnBehalf Of Jo Taliaferro Sent: Friday, August 07, 2009 4:14 PM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: margins Hi, What about setting the "lines per page? Even though top and bottom margin are set, I think you would want to set the number of lines per page in your embosser settings. Don't quote me, I'm a novice! If I'm right, then I've learned from my studies. Jo Taliaferro -----Original Message-----From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] OnBehalf Of Curtis Jackson Sent: Friday, August 07, 2009 3:38 PM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: margins I have a question when I try to print some thing with dbt 10.7 and it has multiple pages for example the bottom of page one will over lap in to pagetwo and when you tear the apart half of the top of page two is on the bottomof page one how can I fix that we tried changing the top margin but that doesn't seem to work -----Original Message-----From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] OnBehalf Of George Bell Sent: Thursday, August 06, 2009 3:44 AM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: headings, Office2007 Hi Jo, Sorry if the following appear to be silly questions, but something does appear to be amiss here. Do I take it that you have opened the file in DBT 10.7? (If you don't have 10.7, what version do you have?) Are you saving your Word 2007 files as type Word 97-2003 (*.doc) In Word, if you go to modify the Heading 2 Style, what does it say in the "Style is based on:" list box? If all else fails, can you send me the Word file as an attachment to george@xxxxxxxxxxxxxxxxxxx as I suspect there's something very subtle wrong here. George. -----Original Message----- From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Jo Taliaferro Sent: 06 August 2009 04:28 To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] headings, Office2007 Hi everyone, I have reviewed the way my heading level 2 appears in a Word 2007 document and it is aligned at the left margin with the font size not being much smaller than heading level one. How can Duxbury then put that heading in cell 5? Or...? Are headings different in Word 2003 which Duxbury works well with? I use Window-Eyes and so when I want to do a head 1, my shortcut keystroke is control plus alt plus 1. For heading level 2 the keystroke is the same except that the digit 2 is used. Thanks for the explanation. Jo Taliaferro...learning * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *
* * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *