[duxuser] Re: Margins
- From: "Steve Dresser" <s.dresser@xxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sat, 08 Aug 2009 23:04:46 -0400
Curtis,
After following my instructions, you'll need to set your top margin back to
3, which I'll assume you already know how to do since you've done it before.
Also, if you plan to have your embosser's top margin set to 3, you'll need
to make sure that the Top Margin in your Global/Document Settings is set to
0. Note that the Juliet Pro-60's Top-of-Form (which you referred to as Top
Margin) is measured in tenths of inches, while DBTW's Top Margin is measured
in lines. You can use either one to achieve the proper spacing at the top
of the page, but you can't use both. If you do, you'll run into all sorts
of problems with your paging.
Steve
----- Original Message -----
From: "Curtis Jackson" <cjackson102@xxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Saturday, August 08, 2009 22:40
Subject: [duxuser] Re: Margins
I'm using a Juliet pro 60 25 lines per page 31 characters I have my top
margin set to 3 and where do I go to set the bottom margin I didn't see a
place to do that. I'm running 11 inch narrow paper
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx]
On
Behalf Of Dave Durber
Sent: Saturday, August 08, 2009 9:22 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Margins
Curtis:
What embosser are you using?
What size of paper are you using for the document?
Did you set a top margin?
If so, how many lines did you set for the top margin?
Did you set a bottom margin?
If so, how many lines did you set for the bottom margin?
How many lines of braille per page did you set?
How many characters per line did you set?
Sincerely:
Dave Durber
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
