[duxuser] Re: Margins
- From: "Curtis Jackson" <cjackson102@xxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sun, 9 Aug 2009 02:08:22 -0500
The reason I have a high top margin is cause that's the only way I could
stop it from cutting off my first line at the top of the page cause it would
start printing right at the top of the page
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Dave Durber
Sent: Saturday, August 08, 2009 11:01 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Margins
Curtis:
In the menu for the Juliet, set the following settings as follows:
Paper length to 11 inches;
Lines per Page to 27;
Characters per line to 31.
In DBT:
Open the desired document and press CTRL+F11, to open the "Embosser Setup"
Menu Item. Change the settings as follows:
Embosser: Juliet Pro (if previously defined under the Global Embosser Setup
Menu);
Tab once, to move to the "paper Type". If the default is currently 11 Inch
Wide Width, tap the UP ARROW key until the 11 Inch Narrow Width is selected.
Tab once, to move to the "Characters Per Line". Enter 31 to set the new
value.
Tab once to move to the"Lines Per Page". Make sure that the value is set to
25.
Tab once more to move to the "Top Margin in Lines". Enter the value for the
top margin.
Tab to the "OK" button and press ENTER to close the dialog box and save the
new settings for the current document.
I am curious as to why you would want a top margin of 3 lines per page. An
enormous waste of paper I would of thought, unless it is for a very specific
purpose!
Sincerely:
Dave Durber
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
