[duxuser] Re: Using Duxbury with odd-sized pages
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Thu, 21 Aug 2008 08:08:01 +0100
Hi Mel,
Just to be 100% certain, is your embosser actually an
Enabling Technologies "Juliet Pro 60"?
And are the dimension you give the width followed by the
depth?
And is the width the overall width including the sprocket
feed holes down each side, or the width after removal?
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Mel
Demissay
Sent: 21 August 2008 06:54
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Using Duxbury with odd-sized pages
Hi George,
somewhat related to the same topic regarding paper size
with Juliet 6
Pro... How could I change paper size from 11.5 by 11 to 8.5
11? The reason
why I am asking this question is that I have a tractor feed
labels from APH
that come in 8.5 by 8 size that I'd like to use. Is the
tractor adjustable?
If so, which size do I need to adjust? Thanks
Mel
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx]On Behalf Of George
Bell
Sent: Wednesday, August 20, 2008 9:55 AM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Using Duxbury with odd-sized pages
Hi Anthony,
In your Duxbury folder is a file called "emb.elt". Make a
copy of it before you go further.
Make sure you are not running DBT, and open this file in
Notepad.
You need to search for the section "Enabling Juliet Pro 60"
- which does have the quotes.
Go down the file from here about 17 lines to the line which
says - Encoding = "display.cpt", "Spanish"
Immediately below this, add a line, and insert the following
line, noting the two spaces at the beginning.
Form "4_in" = 60 x 40 ; SinglePage ; 24 x 10 ; 24 x 10
To explain,
"4_in" is what will appear in the Form section of your
embosser setup.
"60 x 40" means 6 inches wide by 4 inches deep.
The two instances of "24 x 10" are the desired and maximum
characters per line followed by lines per page. (Keep those
the same for simplicity's sake) The 24 x 10 can be varied,
but should be fairly close.
The full section is shown below.
George.
"Enabling Juliet Pro 60"
# *** Embosser definition unchanged since 04/06/2005
# using escape sequence, using Enabling Driver if you say
embosser allows escape sequences
# esc X, esc K, esc W, esc T, esc L, esc R, esc Q, esc H,
esc &, esc i
{
CanDoInterpoint
ETMediumResGraphics
ETHighResGraphics
PageWrap
ETmulti
MaximumCells = 40
MaximumLines = 27
ETCAllowEscapeCodes
Driver = "Emb_EnablingEmbosserDriver"
Encoding = "display.cpt", "North American English"
Encoding = "display.cpt", "French"
Encoding = "display.cpt", "German"
Encoding = "display.cpt", "Spanish"
Form "4_in" = 60 x 40 ; SinglePage ; 24 x 10 ; 24 x 10
Form "10_n" = 85 x 100 ; SinglePage ; 34 x 24 ; 32 x 23
Form "11_n" = 85 x 110 ; SinglePage ; 34 x 27 ; 32 x 25
Form "11_w" = 115 x 110 ; SinglePage ; 40 x 27 ; 40 x 25
Form "12_n" = 85 x 120 ; SinglePage ; 34 x 30 ; 32 x 28
Form "12_w" = 115 x 120 ; SinglePage ; 40 x 30 ; 40 x 28
Form "13_n" = 85 x 130 ; SinglePage ; 34 x 32 ; 32 x 30
Form "13_w" = 115 x 130 ; SinglePage ; 40 x 32 ; 40 x 30
}
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Anthony
Tibbs
Sent: 20 August 2008 14:19
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Using Duxbury with odd-sized pages
Hi George,
I am using a Juliet Pro, and am looking at 6" by 4" sheets.
(6 inches wide, 4 inches high.) The overall page size is 7
inches by 4 inches, but one of those inches width-wise is
for the tractor feed holes.
Take care,
Anthony
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Wednesday, August 20, 2008 6:47 AM
Subject: [duxuser] Re: Using Duxbury with odd-sized pages
Hi Anthony,
Custom form sizes can be set up in a file called emb.elt.
It's not exactly rocket science, but does need to be done
with care.
If you could tell me exactly what make and model of braille
embosser you have, and the size of paper you are considering
(please make it clear which measurement is width, and which
is depth), I'll do my best to explain how to set this up.
George.
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Anthony
Tibbs
Sent: 19 August 2008 22:32
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Using Duxbury with odd-sized pages
Hi there,
I may have a need to print many copies of a document on an
odd-sized page (likely 8" x 5"), on perforated pages such as
those available here
(http://www.braillepaper.com/continuous.php).
The question is, can Duxbury deal with this? I am using DBT
10.6, and the Embosser Setup dialog does not appear to have
any degree of flexibility in its paper size options
(offering only standard "narrow" and "wide" paper formats),
and certainly no way to adjust the length.
Will this matter, i.e. if one sets the lines-per-page
setting appropriately, will the "form size" chosen make any
difference?
Take care,
Anthony
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
