Try pushing the input level until it distorts, then back it off a little, and see what the post meter reading is! It might do the trick, possibly showing that Sonar isn't seeing the input properly? I dunno, might work... Alternatively, have you reset and refreshed the meters etc? ----- Original Message ----- From: "Phil Halton" <philhalt@xxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Saturday, January 27, 2007 4:39 PM Subject: [ddots-l] Re: metering discrepancies > that's what I did, I armed track, and read meter with f2 after first > resetting the meter with triple f2. it read approx -5 DB, then on > playback with track unarmed, meter read approx -17 db. I changed no > settings--I just loaded the normal template into a new session of sonar, > and began recording after checking input level. I haven't really given > much attention to this aspect of sonar(digital audio recording), and I'll > have to investigate it a little more with an eye towards this problem. > > > . > ----- Original Message ----- > From: "Mike Christer" <m-christer@xxxxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Saturday, January 27, 2007 9:11 AM > Subject: [ddots-l] Re: metering discrepancies > > >> Phil! >> >> When looking at the input level, make sure the feedback you get from JAWS >> says, "input", and not "output"? >> >> I guess you know that you should take the meter level when the track is >> actually armed? >> >> Mike >> >> Mike >> ----- Original Message ----- >> From: "Luis Elorza" <luiselorza@xxxxxxxxx> >> To: <ddots-l@xxxxxxxxxxxxx> >> Sent: Saturday, January 27, 2007 4:18 AM >> Subject: [ddots-l] Re: metering discrepancies >> >> >>> maybe you lowered the volume for that track. the meter shows the output >>> level not your wave file level. >>> >>> ----- Original Message ----- >>> From: "Phil Halton" <philhalt@xxxxxxxxxxx> >>> To: "ddots-l" <ddots-l@xxxxxxxxxxxxx> >>> Sent: Friday, January 26, 2007 4:43 PM >>> Subject: [ddots-l] metering discrepancies >>> >>> >>>> When I check meter levels with an audio track armed, then record on >>>> that track, and then check my levels on playback, there is a big >>>> discrepancy. For example, I had an input level of around -5 DB with an >>>> armed track, then on playback, the meters read around -17 DB. Why the >>>> big discrepancy? >>>> >>>> Is this a sonar thing, or something to do with my hardware? I'm using >>>> an Echo Indigo I/O laptop soundcard with sonar 5.2 >>>> >>>> ** To leave the list, click on the immediately-following link:- >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>> ** If this link doesn't work then send a message to: >>>> ** ddots-l-request@xxxxxxxxxxxxx >>>> ** and in the Subject line type >>>> ** unsubscribe >>>> ** For other list commands such as vacation mode, click on the >>>> ** immediately-following link:- >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >>>> Subject:- faq >>>> >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** ddots-l-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >>> Subject:- faq >>> >>> >>> >>> -- >>> No virus found in this incoming message. >>> Checked by AVG Free Edition. >>> Version: 7.1.410 / Virus Database: 268.17.12/653 - Release Date: >>> 26/01/2007 >>> >>> >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** ddots-l-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >> Subject:- faq >> >> > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > Subject:- faq > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.410 / Virus Database: 268.17.12/653 - Release Date: > 26/01/2007 > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq