[ddots-l] Re: exporting to sound forge
- From: "Omar Binno" <omarbinno@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 29 Jan 2007 17:06:16 -0500
Looks like there was dead space at the end of the file, which I removed.
However, this is what I'm not understanding; I only recorded 28 bars of the
song as audio. So I figured that only those 28 bars would get exported. Am I
wrong here?
Thanks.
Omar Binno
----- Original Message -----
From: James Malone
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 29, 2007 5:01 PM
Subject: [ddots-l] Re: exporting to sound forge
Is there dead space either before or after the file?
------------------------------------------------------------------------------
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Omar Binno
Sent: Sunday, January 28, 2007 4:05 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: exporting to sound forge
The file I'm exporting is only about a minute long, but it's taking about 15
minutes to mix down.
Omar Binno
----- Original Message -----
From: Luis Elorza
To: ddots-l@xxxxxxxxxxxxx
Sent: Sunday, January 28, 2007 6:45 PM
Subject: [ddots-l] Re: exporting to sound forge
to export the mix select file, export , audio. and from the dialog select
the preset titled all.
type a filename and select file type then go to the export button and hit
enter.
a wave file must be hours long to use gigabytes.
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Sunday, January 28, 2007 2:48 PM
Subject: [ddots-l] exporting to sound forge
Hi All:
I'm trying to export a cwp file over to sound forge. After the mix down,
the file becomes a wav file, but it's an enormous file, (over 3 gigs.) I'm sure
I'm doing something wrong when exporting. Then, when I go to open it in sound
forge, I'm getting an error message that says something like "make sure the
read only is enabled for this file, (I do have wav checked in the file types.)
Any help would greatly be appreciated.
Thanks.
Omar Binno
Other related posts:
