Thanks, I'm new at this. Now that you say
that, your right it doesn't seem like I can
change i if it is a loop. I guess I have to tap it in.
.
Thanks Tom
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx]On Behalf Of Sandy Licht
Sent: Thursday, August 24, 2006 12:35 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Sonar 5 installed without effects presets
If it is a loop, it doesn't seem to me you would
be able to change the time signature. That
wouldn't really make much sense, would it? Since
I've been off list, perhaps some things have
changed? But changing the meter of a loop? Who knows?
At 10:34 AM 8/24/2006, you wrote:
>I've a measure of drums from the smart loops
>file of wave samples. It plays in 4/4 time. I
>want to make it 3/4 time I make the changes in
>the meter dialogue box but no change occurs. It
>looks like Gordon is saying I need to play along
>with the metronom to get the 3/4 time. I want
>to know if I could get this drum sample to change.
>Do I set the time before I copy the file?
>-----Original Message-----
>From: ddots-l-bounce@xxxxxxxxxxxxx
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx]On Behalf Of Kevin L. Gibbs
>Sent: Tuesday, August 22, 2006 4:04 PM
>To: ddots-l@xxxxxxxxxxxxx
>Subject: [ddots-l] Re: Sonar 5 installed without effects presets
>
>
>What was your original meter? What is your new meter? Do you have
>different notes assigned to the first beat and other beats in your
>metronome dialog?
>K.
>
>-----Original Message-----
>From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>On Behalf Of DeRosa, Thomas
>Sent: Tuesday, August 22, 2006 11:49 AM
>To: ddots-l@xxxxxxxxxxxxx
>Subject: [ddots-l] Re: Sonar 5 installed without effects presets
>
>
>Hi, I'm trying to apply a meter change on a drum track in a project but
>after I set the values in the meter dialogue box and check OK I play
>the track and the meter stays the same.
>Does anyone know what I'm missing here.
>
>Tom
>
>-----Original Message-----
>From: ddots-l-bounce@xxxxxxxxxxxxx
>[mailto:ddots-l-bounce@xxxxxxxxxxxxx]On Behalf Of dr cc
>Sent: Tuesday, August 22, 2006 2:35 PM
>To: ddots-l@xxxxxxxxxxxxx
>Subject: [ddots-l] Re: Sonar 5 installed without effects presets
>
>
> Hi Bob,
>I had the same problem when I tried to use the effects. Go to effects,
>use
>the application key, arrow to audio sub minue, choose the cakewalk or
>whatever you want, then go to presets and in the combo box use Ault down
>
>error and all of your presets should be there.
>----- Original Message -----
>From: "Bob" <bob2935@xxxxxxxxx>
>To: <ddots-l@xxxxxxxxxxxxx>
>Sent: Monday, August 21, 2006 3:55 PM
>Subject: [ddots-l] Sonar 5 installed without effects presets
>
>
> > Hi all. Originally, I was going to email only Bill and Gord about
> > this unusual problem but I thought it might be interesting to other
> > Sonar owners who may know of a solution. When I first installed Sonar
>
> > 5 Producer back in
> > June, I believe I had access to all of the effects presets that
>supposedly
> > come with the program although I don't entirely know for sure anymore.
>I
> > wasn't sure if I had all of the available soft synthes installed and a
>
> > list
> > member recommended in another thread that I uninstall and reinstall
>Sonar
> > selecting "all" in each of the options screens for each software
> > component.
> > This I did and ever since, the combo boxes for all effects presets
>have
> > been
> > empty. Like I say, I don't remember for sure if I had the presets on
> > first
> > install. The other thing I noticed is that all my other settings were
> > intact from the previous installation. I decided to completely remove
>
> > Sonar
> > and Cake Talking as Bill advised me to do last week by clearing out
>all
> > Cake
> > Talking script files in the Jaws Settings folder before uninstalling
>Cake
> > Talking. I then uninstalled Sonar carefully deleting all files and
> > folders
> > afterward with the hope of starting completely over. I then upgraded
>Cake
> > Talking to the latest patch and reinstalled Sonar without messing with
>any
> > of the option screens. Frustratingly, all my old settings were back,
> > (normal template loads instead of quick start etc.) and effects preset
>
> > combo
> > boxes were empty when I tried to patch them in either as real time or
> > destructive effects. Yes, the Cake Walk effects are available to be
>used
> > and modified but it takes a long time to set the parameters for each
> > effect
> > when everyone else has factory presets at their disposal. Of course,
>the
> > Perfect Space and anything else not fully supported are useless
>without
> > presets. I tried again uninstalling and reinstalling everything, this
>
> > time
> > selecting the default settings button in each of the Sonar options
> > screens.
> > Again, all my settings remained and no presets to be found. AS a last
> > resort, I upgraded to Sonar 5.2 but the presets were not restored.
> > I welcome any new information or suggestions to solve this problem so
>that
> > I
> > can get back to recording. Until then, my studio is dry.
> > Bob.
> >
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>** or send a message, to
>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>** or send a message, to
>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>** or send a message, to
>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
>** To leave the list, click on the immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe]
>** If this link doesn't work then send a message to:
>** ddots-l-request@xxxxxxxxxxxxx
>** and in the Subject line type
>** unsubscribe
>** For other list commands such as vacation mode, click on the
>** immediately-following link:-
>** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
>** or send a message, to
>** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Sandy Licht
Phone: 409-898-8218
Jeremiah 29:11 - 14A
11For I know the plans I have for you," says the LORD. "They
are plans for good and not for disaster, to give
you a future and a hope. 12In those days when you
pray, I will listen. 13If you look for me in earnest,
you will find me when you seek me. 14I will be
found by you," says the LORD...
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=subscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subjectúq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
