I was on the technical support team for Ghost when I worked at Symantec. Trust me, it's great for moving from a small drive to a larger one. I did it all the time. However, we're dealing with a problem that's specific to FAT32. FAT32 volumes are theoretically possible into the terabyte range, but it's not practical. I think in this situation we simply have a practical limitation, hence my suggestions. Vern ----- Original Message ----- From: <Cuffy10@xxxxxxx> In a message dated 4/27/04 5:34:16 PM Pacific Daylight Time, beddy1@xxxxxxxxxxxxxxxx writes: Ayep!!! If nothing else ghost has the clone feature also... You might want to take a look at this........ http://ghost.radified.com/norton_ghost_1.htm Cloning & Batch Files Let me preface this section by saying that I have never cloned anything. I've only created & restored images. If I was going to clone either a disk or partition, I'd first want to talk to someone who has some real-life experience. When you use Ghost for cloning you are essentially doing what XXCopy does. There IS NO IMAGE involved when you clone. Cloning is like copying. No image file is created during the cloning process. During cloning, Ghost copies files from the source partition (or disk) to the destination (target). The thing that makes Ghost's cloning features so powerful is that ALL the files are copied. Many people ask why they can't simply use Windows to copy files from one drive to another. Try it, you'll discover why: Windows file-copy won't copy the FAT (File Allocation Table), partition table, or boot files .. all of which you need. You may hear about a utility called Xcopy. I've never used it, but have heard it mentioned & debated many times. Some insist that it works fine; others claim it's flawed. Here's a link called Xcopy Xposed that says it's flawed, and gives reasons why. Another utility called xxcopy (no, not porn) supposedly works like xcopy, but without its (alleged) problems. I've never used it. You might also find helpful these links to disk utilities from several major hard drive manufacturers, including Maxtor, Seagate, and Western Digital. These utilities do essentially the same thing that Ghost's cloning feature does. Ghost's cloning feature is typically used to copy the contents of one disk/partition (usually older/smaller) to another (usually newer/larger). Users have reported success with this method. Some caution that, if a boot drive is invloved, you must set a partition on the new drive as the ACTIVE partition. You can do this with FDISK. I was under the impression that the destination drive must be at least as big as the source, but Dharma Singh writes to say this is not true. He says that you can clone a larger drive (36GB, for example) to a smaller one (18GB, for example) as long as the *contents* (data) of the source drive do not exceed the capacity of the destination (target). He says he has actually done this. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Education is when you read the fine print. Experience is what you get if you don't. -- Pete Seeger" --------------------------------------------------------------------------- Computer Talk Shop http://www.computertalkshop.com Un-subscribe/Vacation, http://www.computertalkshop.com/list_options.htm List HowTo: http://www.computertalkshop.com/faq.htm To join Computer Talk Shop's off topic list, please goto: http://computertalkshop.com/other_cts_lists.htm ---------------------------------------------------------------------------