Yep, q solved the problem, thanks
Sent from my iPhone
On 17 Feb 2017, at 18:16, Zachary Kline <zkline@xxxxxxxxxxxxx> wrote:
Declan,
Did you perhaps pause the sim or hit q by accident? Either of those would
mute the sounds. The only other way to mute engine sounds requires
intentionally going into the options dialog, which I doubt could happen on
accident.
Best,
Zack.
On Feb 17, 2017, at 10:05 AM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
Thanks for that Patrick, I managed to complete my first flight now. For some
reason when I landed though engine sound stopped and now I have no engine
sounds, any ideas on how to get in back?
Sent from my iPhone
On 17 Feb 2017, at 17:30, Patrick Kelly <patjk89@xxxxxxxxx> wrote:
If the flight plan dialogue comes up, just press escape, and you should be
in business again.
On Feb 17, 2017, at 10:58 AM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
Hi, so here's what I think was happening. As you correctly said, when I
said acknowledge it must've put the simulator into pause mode back on the
flightplan screen. At the time I didn't realise this was was the case and
that's why I was reading through the manuals just to try and find a reason
for it going back to the flightplan screen. Obviously it just went into
pause, so I guess my only question is once this happens how do I get back
onto my active flight screen. I realise now that I should have simply said
report traffic insight at the time. I apologise for making things more
confusing,
Thanks Declan.
On 17 Feb 2017, at 16:46, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
Hello Declan,
I was merely responding to your question using the information your
provided as a basis for analysis.
If as you stated, you responded with the phrase "Acknowledge" in response
to an ATC controller indicating that there is traffic nearby, that would
have cause IYP to emit the "1" key which would have selected the option
to [Select a New IFR destination] from the ATC menu. By doing so, the
simulator would have been placed in the pause mode and the "flight plan"
panel would have properly popped-up in order to facilitate IFR selection.
If on the other hand, your would heve responded with (as I stated), "We
have the traffic", or "Traffic in sight", that would have cause IYP to
emit the "2" key (the required response) and the flight would have
contined as normal.
Thus, I am confused by your statement... "I've made sure to read all the
manuals".
Regrettably at this point, I neither know how to proceed, nor how I can
help you.
Robert
On Fri, Feb 17, 2017 at 3:29 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi, I've made sure to read all the manuals, but despite that when ever I
am flying the game sometimes puts me back on the flightplan screen. Is
this the game crashing or the aircraft? I can't think of any reason why
the aircraft itself would have crashed, but is that the simulators way
of telling me I crashed the aircraft?
On 17 Feb 2017, at 00:36, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
As I believe I stated previously, you really need to go through the
SimpleATC command set. The proper response in this instance is
documented as:
Traffic in the Area
If ATC states that you have traffic in your area, and asks you to
report that you have the traffic in sight, simply say,
"Traffic in sight", or "We have the traffic"
I strongly suggest that, despite your anxious feelings to get airborne,
consider that you're going to be flying a "real airplane". With that
said, you'd never take off without reading ALL of the manuals...
especially the sections involving the extremely complex ATC
communications protocols.
Please go here:
Select BLIND PILOTS CLICK HERE
Find and select Site Map
Find and select Simple ATC Communications
There you will find the following sections under IFR:
Ensure Flight Plan is Loaded Properly
Get Weather
Departing from a Non-Towered Airport
Request IFR Clearance
Announce Taxi Intentions
Announce Takeoff Intentions
Departing from a Towered Airport
Request IFR Clearance
Request Taxi Clearance
Request Takeoff Clearance
En Route ATC Communications
After Departing from a Non-Towered Airport
After Departing from a Towered Airport
ATC En Route Directives and Communications
Landing at a Non-Towered Airport
Performing an ILS Approach at a Non-Towered Airport
Performing a Visual Approach at a Non-Towered Airport
Landing at a Towered Airport
Performing an ILS Approach at a Towered Airport
Performing a Visual Approach at a Towered Airport
SimpleATC Command Set
Robert
On Thu, Feb 16, 2017 at 3:52 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
So just a quick query, I was flying when the controller informed me
of traffic four miles at 12 o'clock. I said acknowledge but nothing
happened so I assumed it would be fine. About a minute later my Sim
crushed and jaws said I was back on the flight plan screen, but I
couldn't explore the interface with the keyboard , does this mean my
aircraft crashed? It's your plane was also responding to my command
still but I have no sound of the aircraft.
Sent from my iPhone
On 16 Feb 2017, at 22:38, Robert Cezar <robert@xxxxxxxxxxxxxxx> wrote:
I am out of the office. Will be back in 2 hours.
R
On Feb 16, 2017 1:40 PM, "Declan Webster"
<declan.webster44@xxxxxxxxx> wrote:
Hi, I've managed to get my registration code, and by the way I'm
using this email address, but now when I enter the code it just
wipes out what I've written and says it's wrong everytime I click
submit. I have tried the code with and without the dashes but for
some reason it still says it's wrong.
Sent from my iPhone
On 16 Feb 2017, at 21:15, Robert Cezar <robert@xxxxxxxxxxxxxxx>
wrote:
If possible, please use the SAME e-mail address when purchasing
your REG KEY. Otherwise, please let me know which of the 2 you
prefer to use w/ IYP.
r
On Thu, Feb 16, 2017 at 1:11 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Thanks for that.
Declan
Sent from my iPhone
On 16 Feb 2017, at 21:10, Robert Cezar <robert@xxxxxxxxxxxxxxx>
wrote:
Permit me to simply things. Your PILOT # is:
19846
r
On Thu, Feb 16, 2017 at 1:05 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
I haven't purchased the registration key yet, to do that it says
I need my pilot number and so I'm trying to get it from the
profile page but to get onto that page I have to login with my
email and password
Sent from my iPhone
On 16 Feb 2017, at 21:02, Robert Cezar <robert@xxxxxxxxxxxxxxx>
wrote:
Did you use the SAME e-mail address for your TRIAL as you did
when you purchased the REG KEY?
On Thu, Feb 16, 2017 at 12:59 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
When trying to login to the website, it says my email address
is incorrect but that's definitely the one I put in when I
registered, I've even got the emails that were sent to me
initially on the email address I'm trying to put in now so it
has to be right. Any idea why this could be?
Sent from my iPhone
On 16 Feb 2017, at 20:22, Robert Cezar
<robert@xxxxxxxxxxxxxxx> wrote:
Hi,
Login to the IYP Dashboard:
http://itsyourplane.com/html/login.asp
and select My Profile.
Your PILOT NUMBER is listed at the top of th page.
r
On Thu, Feb 16, 2017 at 12:18 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi, to register I YP, how do I find my pilot number and then
the part where i enter my registration key
Thanks, Declan
Sent from my iPhone
On 16 Feb 2017, at 18:29, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Okay thanks, that makes sense, I'll make sure to register
then.
Declan
Sent from my iPhone
On 16 Feb 2017, at 18:22, Robert Cezar
<robert@xxxxxxxxxxxxxxx> wrote:
Hello,
Only a REGISTERED version of IYP can operate in the BVI
mode. There's a minimum 30-day REFUND policy, so there's
no reason not to register IYP.
r
On Thu, Feb 16, 2017 at 10:19 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi again. I'm currently on the trial version of Iyp and
I've managed to get in the air. At the minute, Mike
performs the takeoff but does not do all the things such
as retract flaps and gear as well as controlling
airspeed. Is this just because I'm currently on the trial
version?
Sent from my iPhone
On 15 Feb 2017, at 22:38, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Declan,
No, I was talking about the flight file, which is
distinct from the flight plan file. The flight file has
a .flt extension, and are created by the save/load
buttons on the main “free flight,” screen. Those are
the buttons you need to use, not the save/load buttons
on the flight plan screen.
Best,
Zack.
On Feb 15, 2017, at 2:35 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
So once I have created my flight plan, I have to save
it, and then click on load, select it and click okay
again, before clicking fly now. Before i was just
creating my flight plan and then clicking fly now
straight away.
Declan Sent from my iPhone
On 15 Feb 2017, at 22:30, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Declan,
Either screen reader should be okay. YOu probably
want to start from a gate or ramp.
When you create and save your flight, are you then
loading it into the sim again? If you don’t do this,
you will still get your “no flight plan has been
loaded,” message. This is not actually true, as the
“destination work around,” I mentioned previously
still lets you fly and get distance information and
so forth.
Best,
Zack.
On Feb 15, 2017, at 2:25 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
If I wanted to make a flight plan, and I think I'm
following the correct process on the flight deck
doc, do I need to select a runway or ramp to start
from. That's the only reason I can think of why it
wouldn't be working. If so, how do you do this as
I'm struggling to get this part to work in the
filters area so it will read with my screen reader.
Just in case if one is easier, I have jaws and NVDA.
Sent from my iPhone
On 15 Feb 2017, at 21:45, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
This is a bit buggy, or at least not as intuitive
as it could be. You've created a flight plan, but
you haven't saved an FSX flight. You can read about
the process in the flight deck document on the IYP
site, or alternatively just say, "Make the
destination airport 'icao code'," which also seems
to work. Personally, I feel like flights are just a
little too cluttered, and I prefer this latter
method.
Sent from my iPhone
On Feb 15, 2017, at 1:40 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi again, sorry for all the questions. When I do a
flight plan, I select the aircraft and weather
conditions before going to flightplan and
selecting my start and end destinations, before
selecting IFR and low altitude airways. Then I
click okay and save it. Then I click fly now, but
then Mike says no flight plan has been loaded. I
have also made the local database to make sure
that its working.
Sent from my iPhone
On 15 Feb 2017, at 20:32, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Declan,
If FSX isn’t paused, the “Q,” key is used to mute
and unmute sounds. Is it possible you hit this by
accident? Alternatively, P pauses or unpauses
the sim.
Best,
Zack.
On Feb 15, 2017, at 12:30 PM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi, thanks so much for all your help, I'm now up
and runnning. I only have one problem at the
moment, I have no engine sound even though it
was the engine has started, thanks for any tips.
Sent from my iPhone
On 15 Feb 2017, at 19:43, Jason FayreBlind and Visually impaired Pilots mailinglist
<jfayre@xxxxxxxxx> wrote:
By default, flight simulator will pause when
you switch away from it. There's a setting
under General settings that is called something
like pause on task switch. You need to turn
that off.
Sent from my iPhone
On Feb 15, 2017, at 2:12 PM, Declan WebsterBlind and Visually impaired Pilots mailinglist
<declan.webster44@xxxxxxxxx> wrote:
Hi, so I'm still having problems getting it's
your plane to work with my simulator. Here's
what I'm doing at the moment if someone could
tell me what I'm doing wrong. I launch it's
your plane and then launch the simulator. I
click on free flight, select the Cessna
aircraft and then select my starting point.
I'm not doing a flight plan at this point.
Then I click fly now. I wait for the scenery
to fully load, and i usually get an engine
sound from the aircraft but I have been told
by someone cited that the plane is currently
sitting on the ground. I alt tab to it's your
plane and Mike starts talking, explaining
about me being in the trial version. Then he
says it's your plane we are ready to go, but
when I try and give him any commands, like do
all checklists or open options panel or
something, nothing happens. I just get the
beats from speech recognition telling me it
didn't understand, even though I have
configured it already. Also, when I tab back
to Microsoft flight Sim, I no longer hear the
engine sounds. I'm just not sure where I'm
going wrong really.
On 15 Feb 2017, at 17:58, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx> wrote:
Hi Declan,
This is probably because you just picked the
type of aircraft you wanted, and not its
location. The default FSX flight starts with
you already in the air.
The solution is to go to the second Change
button, which lets you pick an airport to
park at. The search interface is a bit
confusing, and I usually just memorize the
airport ID of the place I want.
Hope this helps,
Zack.
On Feb 15, 2017, at 8:12 AM, Declan Webster
<declan.webster44@xxxxxxxxx> wrote:
Hi. I have just purchased Microsoft flight
simulator steam addition with Iyp. I have
completed all of the set up and I'm now
looking to try and complete my first flight.
I was just wondering if someone could help
me with the procedure, so far I have managed
to only load the aircraft in flight at which
point I wipe he asks me if I would like to
do the descent checklist. Could someone
assist me with loading the aircraft at a
gate/ramp so I could run through all of the
checklist and complete the flight properly.
Thanks for any help, Declan
Blind and Visually impaired Pilots
mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a
message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the
word unsubscribe in the subject of your
message.
For other options such as digest, send a
message to
bvipilots-request@xxxxxxxxxxxxx and put the
word help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message
to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the
word unsubscribe in the subject of your
message.
For other options such as digest, send a
message to
bvipilots-request@xxxxxxxxxxxxx and put the
word help in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message
to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the
word unsubscribe in the subject of your
message.
For other options such as digest, send a
message to
bvipilots-request@xxxxxxxxxxxxx and put the
word help in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a
message to
bvipilots-request@xxxxxxxxxxxxx and put the
word help in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message
to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message
to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help
in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help
in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help
in the subject of your message.
//www.freelists.org/list/bvipilots
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx and put the word help in
the subject of your message.
