Declan,
Did you perhaps pause the sim or hit q by accident? Either of those would mute
the sounds. The only other way to mute engine sounds requires intentionally
going into the options dialog, which I doubt could happen on accident.
Best,
Zack.
On Feb 17, 2017, at 10:05 AM, Declan Webster <declan.webster44@xxxxxxxxx>
wrote:
Thanks for that Patrick, I managed to complete my first flight now. For some
reason when I landed though engine sound stopped and now I have no engine
sounds, any ideas on how to get in back?
Sent from my iPhone
On 17 Feb 2017, at 17:30, Patrick Kelly <patjk89@xxxxxxxxx
<mailto:patjk89@xxxxxxxxx>> wrote:
If the flight plan dialogue comes up, just press escape, and you should be
in business again.
On Feb 17, 2017, at 10:58 AM, Declan Webster <declan.webster44@xxxxxxxxx
<mailto:declan.webster44@xxxxxxxxx>> wrote:
Hi, so here's what I think was happening. As you correctly said, when I
said acknowledge it must've put the simulator into pause mode back on the
flightplan screen. At the time I didn't realise this was was the case and
that's why I was reading through the manuals just to try and find a reason
for it going back to the flightplan screen. Obviously it just went into
pause, so I guess my only question is once this happens how do I get back
onto my active flight screen. I realise now that I should have simply said
report traffic insight at the time. I apologise for making things more
confusing,
Thanks Declan.
On 17 Feb 2017, at 16:46, Robert Cezar <robert@xxxxxxxxxxxxxxx
<mailto:robert@xxxxxxxxxxxxxxx>> wrote:
Hello Declan,
I was merely responding to your question using the information your
provided as a basis for analysis.
If as you stated, you responded with the phrase "Acknowledge" in response
to an ATC controller indicating that there is traffic nearby, that would
have cause IYP to emit the "1" key which would have selected the option to
[Select a New IFR destination] from the ATC menu. By doing so, the
simulator would have been placed in the pause mode and the "flight plan"
panel would have properly popped-up in order to facilitate IFR selection.
If on the other hand, your would heve responded with (as I stated), "We
have the traffic", or "Traffic in sight", that would have cause IYP to
emit the "2" key (the required response) and the flight would have
contined as normal.
Thus, I am confused by your statement... "I've made sure to read all the
manuals".
Regrettably at this point, I neither know how to proceed, nor how I can
help you.
Robert
On Fri, Feb 17, 2017 at 3:29 AM, Declan Webster
<declan.webster44@xxxxxxxxx <mailto:declan.webster44@xxxxxxxxx>> wrote:
Hi, I've made sure to read all the manuals, but despite that when ever I
am flying the game sometimes puts me back on the flightplan screen. Is
this the game crashing or the aircraft? I can't think of any reason why
the aircraft itself would have crashed, but is that the simulators way
of telling me I crashed the aircraft?
On 17 Feb 2017, at 00:36, Robert Cezar <robert@xxxxxxxxxxxxxxx
<mailto:robert@xxxxxxxxxxxxxxx>> wrote:
As I believe I stated previously, you really need to go through the
SimpleATC command set. The proper response in this instance is documented
as:
Traffic in the Area
If ATC states that you have traffic in your area, and asks you to report
that you have the traffic in sight, simply say,
"Traffic in sight", or "We have the traffic"
I strongly suggest that, despite your anxious feelings to get airborne,
consider that you're going to be flying a "real airplane". With that
said, you'd never take off without reading ALL of the manuals...
especially the sections involving the extremely complex ATC
communications protocols.
Please go here:
Select BLIND PILOTS CLICK HERE
Find and select Site Map
Find and select Simple ATC Communications
There you will find the following sections under IFR:
Ensure Flight Plan is Loaded Properly
Get Weather
Departing from a Non-Towered Airport
Request IFR Clearance
Announce Taxi Intentions
Announce Takeoff Intentions
Departing from a Towered Airport
Request IFR Clearance
Request Taxi Clearance
Request Takeoff Clearance
En Route ATC Communications
After Departing from a Non-Towered Airport
After Departing from a Towered Airport
ATC En Route Directives and Communications
Landing at a Non-Towered Airport
Performing an ILS Approach at a Non-Towered Airport
Performing a Visual Approach at a Non-Towered Airport
Landing at a Towered Airport
Performing an ILS Approach at a Towered Airport
Performing a Visual Approach at a Towered Airport
SimpleATC Command Set
Robert
On Thu, Feb 16, 2017 at 3:52 PM, Declan Webster
<declan.webster44@xxxxxxxxx <mailto:declan.webster44@xxxxxxxxx>> wrote:
So just a quick query, I was flying when the controller informed me of
traffic four miles at 12 o'clock. I said acknowledge but nothing happened
so I assumed it would be fine. About a minute later my Sim crushed and
jaws said I was back on the flight plan screen, but I couldn't explore
the interface with the keyboard , does this mean my aircraft crashed?
It's your plane was also responding to my command still but I have no
sound of the aircraft.
Sent from my iPhone
On 16 Feb 2017, at 22:38, Robert Cezar <robert@xxxxxxxxxxxxxxx
<mailto:robert@xxxxxxxxxxxxxxx>> wrote:
I am out of the office. Will be back in 2 hours.
R
On Feb 16, 2017 1:40 PM, "Declan Webster" <declan.webster44@xxxxxxxxx
<mailto:declan.webster44@xxxxxxxxx>> wrote:
Hi, I've managed to get my registration code, and by the way I'm using
this email address, but now when I enter the code it just wipes out what
I've written and says it's wrong everytime I click submit. I have tried
the code with and without the dashes but for some reason it still says
it's wrong.
Sent from my iPhone
On 16 Feb 2017, at 21:15, Robert Cezar <robert@xxxxxxxxxxxxxxx
<mailto:robert@xxxxxxxxxxxxxxx>> wrote:
If possible, please use the SAME e-mail address when purchasing your
REG KEY. Otherwise, please let me know which of the 2 you prefer to use
w/ IYP.
r
On Thu, Feb 16, 2017 at 1:11 PM, Declan Webster
<declan.webster44@xxxxxxxxx <mailto:declan.webster44@xxxxxxxxx>> wrote:
Thanks for that.
Declan
Sent from my iPhone
On 16 Feb 2017, at 21:10, Robert Cezar <robert@xxxxxxxxxxxxxxx
<mailto:robert@xxxxxxxxxxxxxxx>> wrote:
Permit me to simply things. Your PILOT # is:
19846
r
On Thu, Feb 16, 2017 at 1:05 PM, Declan Webster
<declan.webster44@xxxxxxxxx <mailto:declan.webster44@xxxxxxxxx>> wrote:
I haven't purchased the registration key yet, to do that it says I
need my pilot number and so I'm trying to get it from the profile page
but to get onto that page I have to login with my email and password
Sent from my iPhone
On 16 Feb 2017, at 21:02, Robert Cezar <robert@xxxxxxxxxxxxxxx
<mailto:robert@xxxxxxxxxxxxxxx>> wrote:
Did you use the SAME e-mail address for your TRIAL as you did when
you purchased the REG KEY?
On Thu, Feb 16, 2017 at 12:59 PM, Declan Webster
<declan.webster44@xxxxxxxxx <mailto:declan.webster44@xxxxxxxxx>>
wrote:
When trying to login to the website, it says my email address is
incorrect but that's definitely the one I put in when I registered,
I've even got the emails that were sent to me initially on the email
address I'm trying to put in now so it has to be right. Any idea why
this could be?
Sent from my iPhone
On 16 Feb 2017, at 20:22, Robert Cezar <robert@xxxxxxxxxxxxxxx
<mailto:robert@xxxxxxxxxxxxxxx>> wrote:
Hi,
Login to the IYP Dashboard:
http://itsyourplane.com/html/login.asp ;
<http://itsyourplane.com/html/login.asp>
and select My Profile.
Your PILOT NUMBER is listed at the top of th page.
r
On Thu, Feb 16, 2017 at 12:18 PM, Declan Webster
<declan.webster44@xxxxxxxxx <mailto:declan.webster44@xxxxxxxxx>>
wrote:
Hi, to register I YP, how do I find my pilot number and then the
part where i enter my registration key
Thanks, Declan
Sent from my iPhone
On 16 Feb 2017, at 18:29, Declan Webster <declan.webster44@xxxxxxxxx
<mailto:declan.webster44@xxxxxxxxx>> wrote:
Okay thanks, that makes sense, I'll make sure to register then.
Declan
Sent from my iPhone
On 16 Feb 2017, at 18:22, Robert Cezar <robert@xxxxxxxxxxxxxxx
<mailto:robert@xxxxxxxxxxxxxxx>> wrote:
Hello,
Only a REGISTERED version of IYP can operate in the BVI mode.
There's a minimum 30-day REFUND policy, so there's no reason not
to register IYP.
r
On Thu, Feb 16, 2017 at 10:19 AM, Declan Webster
<declan.webster44@xxxxxxxxx <mailto:declan.webster44@xxxxxxxxx>>
wrote:
Hi again. I'm currently on the trial version of Iyp and I've
managed to get in the air. At the minute, Mike performs the
takeoff but does not do all the things such as retract flaps and
gear as well as controlling airspeed. Is this just because I'm
currently on the trial version?
Sent from my iPhone
On 15 Feb 2017, at 22:38, Zachary Kline <zkline@xxxxxxxxxxxxxBlind and Visually impaired Pilots mailinglist
<mailto:zkline@xxxxxxxxxxxxx>> wrote:
Declan,
No, I was talking about the flight file, which is distinct from
the flight plan file. The flight file has a .flt extension, and
are created by the save/load buttons on the main “free flight,”
screen. Those are the buttons you need to use, not the save/load
buttons on the flight plan screen.
Best,
Zack.
On Feb 15, 2017, at 2:35 PM, Declan Webster
<declan.webster44@xxxxxxxxx
<mailto:declan.webster44@xxxxxxxxx>> wrote:
So once I have created my flight plan, I have to save it, and
then click on load, select it and click okay again, before
clicking fly now. Before i was just creating my flight plan and
then clicking fly now straight away.
Declan Sent from my iPhone
On 15 Feb 2017, at 22:30, Zachary Kline <zkline@xxxxxxxxxxxxxBlind and Visually impaired Pilots mailinglist
<mailto:zkline@xxxxxxxxxxxxx>> wrote:
Declan,
Either screen reader should be okay. YOu probably want to
start from a gate or ramp.
When you create and save your flight, are you then loading it
into the sim again? If you don’t do this, you will still get
your “no flight plan has been loaded,” message. This is not
actually true, as the “destination work around,” I mentioned
previously still lets you fly and get distance information and
so forth.
Best,
Zack.
On Feb 15, 2017, at 2:25 PM, Declan Webster
<declan.webster44@xxxxxxxxx
<mailto:declan.webster44@xxxxxxxxx>> wrote:
If I wanted to make a flight plan, and I think I'm following
the correct process on the flight deck doc, do I need to
select a runway or ramp to start from. That's the only reason
I can think of why it wouldn't be working. If so, how do you
do this as I'm struggling to get this part to work in the
filters area so it will read with my screen reader. Just in
case if one is easier, I have jaws and NVDA.
Sent from my iPhone
On 15 Feb 2017, at 21:45, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx <mailto:zkline@xxxxxxxxxxxxx>> wrote:
This is a bit buggy, or at least not as intuitive as it
could be. You've created a flight plan, but you haven't
saved an FSX flight. You can read about the process in the
flight deck document on the IYP site, or alternatively just
say, "Make the destination airport 'icao code'," which also
seems to work. Personally, I feel like flights are just a
little too cluttered, and I prefer this latter method.
Sent from my iPhone
On Feb 15, 2017, at 1:40 PM, Declan Webster
<declan.webster44@xxxxxxxxx
<mailto:declan.webster44@xxxxxxxxx>> wrote:
Hi again, sorry for all the questions. When I do a flight
plan, I select the aircraft and weather conditions before
going to flightplan and selecting my start and end
destinations, before selecting IFR and low altitude
airways. Then I click okay and save it. Then I click fly
now, but then Mike says no flight plan has been loaded. I
have also made the local database to make sure that its
working.
Sent from my iPhone
On 15 Feb 2017, at 20:32, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx <mailto:zkline@xxxxxxxxxxxxx>> wrote:
Declan,
If FSX isn’t paused, the “Q,” key is used to mute and
unmute sounds. Is it possible you hit this by accident?
Alternatively, P pauses or unpauses the sim.
Best,
Zack.
On Feb 15, 2017, at 12:30 PM, Declan Webster
<declan.webster44@xxxxxxxxx
<mailto:declan.webster44@xxxxxxxxx>> wrote:
Hi, thanks so much for all your help, I'm now up and
runnning. I only have one problem at the moment, I have
no engine sound even though it was the engine has
started, thanks for any tips.
Sent from my iPhone
On 15 Feb 2017, at 19:43, Jason Fayre <jfayre@xxxxxxxxxBlind and Visually impaired Pilots mailinglist
<mailto:jfayre@xxxxxxxxx>> wrote:
By default, flight simulator will pause when you switch
away from it. There's a setting under General settings
that is called something like pause on task switch. You
need to turn that off.
Sent from my iPhone
On Feb 15, 2017, at 2:12 PM, Declan WebsterBlind and Visually impaired Pilots mailinglist
<declan.webster44@xxxxxxxxx
<mailto:declan.webster44@xxxxxxxxx>> wrote:
Hi, so I'm still having problems getting it's your
plane to work with my simulator. Here's what I'm doing
at the moment if someone could tell me what I'm doing
wrong. I launch it's your plane and then launch the
simulator. I click on free flight, select the Cessna
aircraft and then select my starting point. I'm not
doing a flight plan at this point. Then I click fly
now. I wait for the scenery to fully load, and i
usually get an engine sound from the aircraft but I
have been told by someone cited that the plane is
currently sitting on the ground. I alt tab to it's
your plane and Mike starts talking, explaining about me
being in the trial version. Then he says it's your
plane we are ready to go, but when I try and give him
any commands, like do all checklists or open options
panel or something, nothing happens. I just get the
beats from speech recognition telling me it didn't
understand, even though I have configured it already.
Also, when I tab back to Microsoft flight Sim, I no
longer hear the engine sounds. I'm just not sure where
I'm going wrong really.
On 15 Feb 2017, at 17:58, Zachary KlineBlind and Visually impaired Pilots mailinglist
<zkline@xxxxxxxxxxxxx <mailto:zkline@xxxxxxxxxxxxx>>
wrote:
Hi Declan,
This is probably because you just picked the type of
aircraft you wanted, and not its location. The default
FSX flight starts with you already in the air.
The solution is to go to the second Change button,
which lets you pick an airport to park at. The search
interface is a bit confusing, and I usually just
memorize the airport ID of the place I want.
Hope this helps,
Zack.
On Feb 15, 2017, at 8:12 AM, Declan Webster
<declan.webster44@xxxxxxxxx
<mailto:declan.webster44@xxxxxxxxx>> wrote:
Hi. I have just purchased Microsoft flight simulator
steam addition with Iyp. I have completed all of the
set up and I'm now looking to try and complete my
first flight. I was just wondering if someone could
help me with the procedure, so far I have managed to
only load the aircraft in flight at which point I
wipe he asks me if I would like to do the descent
checklist. Could someone assist me with loading the
aircraft at a gate/ramp so I could run through all of
the checklist and complete the flight properly.
Thanks for any help, Declan
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
<mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the
word help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx
<mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the
word help in the subject of your message.
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the
word help in the subject of your message.
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the
word unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the
word help in the subject of your message.
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
help in the subject of your message.
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
help in the subject of your message.
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
help in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help
in the subject of your message.
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help
in the subject of your message.
Blind and Visually impaired Pilots mailinglist
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help
in the subject of your message.
//www.freelists.org/list/bvipilots ;
<//www.freelists.org/list/bvipilots>
To post a message to the list, send a message to
bvipilots@xxxxxxxxxxxxx <mailto:bvipilots@xxxxxxxxxxxxx>
To unsubscribe, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word
unsubscribe in the subject of your message.
For other options such as digest, send a message to
bvipilots-request@xxxxxxxxxxxxx
<mailto:bvipilots-request@xxxxxxxxxxxxx> and put the word help in
the subject of your message.