Try saving your Framemaker document as a PDF, then use Solid Converter PDF to Word to create your Word doc. Tables can be problematic, depending on how they were created in Frame (separate cells or returns?). I can't remember how much it costs or where we got it, but it has worked for us reasonably well. John Bennett Technical Author * +64 (09) 446 1724 * 021 2044551 * john.bennett@xxxxxxxxxxxxxxx ________________________________ From: austechwriter-bounce@xxxxxxxxxxxxx [mailto:austechwriter-bounce@xxxxxxxxxxxxx] On Behalf Of David Petersen Sent: Tuesday, 11 November 2008 1:55 p.m. To: austechwriter@xxxxxxxxxxxxx Subject: atw: FrameMaker to Word conversion Does anyone know of an easy way of converting FrameMaker documents to Word? -- David Petersen Documentation Coordinator Air Systems Thales Australia Thales Australia Centre WTC Northbank Wharf Concourse Level, Siddeley Street Melbourne, VIC 3005 Australia Tel: +61 3 8630 4593 david.petersen@xxxxxxxxxxxxx | www.thalesgroup.com.au DISCLAIMER: This e-mail transmission and any documents, files and previous e-mail messages attached to it are private and confidential. They may contain proprietary or copyright material or information that is subject to legal professional privilege. They are for the use of the intended recipient only. Any unauthorised viewing, use, disclosure, copying, alteration, storage or distribution of, or reliance on, this message is strictly prohibited. No part may be reproduced, adapted or transmitted without the written permission of the owner. If you have received this transmission in error, or are not an authorised recipient, please immediately notify the sender by return email, delete this message and all copies from your e-mail system, and destroy any printed copies. Receipt by anyone other than the intended recipient should not be deemed a waiver of any privilege or protection. Thales Australia does not warrant or represent that this e-mail or any documents, files and previous e-mail messages attached are error or virus free.