Re: [ARMini-support] Warning - use caution if you need to Revert to OS3
- From: "Patric, Aristide Albutat" <albutat@xxxxxx>
- To: armini-support@xxxxxxxxxxxxx
- Date: Wed, 25 Apr 2012 20:54:54 +0200
-------- Original-Nachricht --------
> Datum: Wed, 25 Apr 2012 02:50:14 +0200
> Von: albutat <albutat@xxxxxx>
> An: armini-support@xxxxxxxxxxxxx
> Betreff: Re: [ARMini-support] Warning - use caution if you need to Revert to
> OS3
> Am 24.04.2012, 21:31 Uhr, schrieb A Rawnsley <rcomp@xxxxxxxxxxx>:
>
> > In message <83502888-09ca-4aba-8732-ebd06de5482e@xxxxxxxxxxxxxxxxx>
> > Patric Albutat <albutat@xxxxxx> wrote:
> >
> >> Andrew, just had the very odd situation that my screen remained black.
> >> Board lit, keyboard lights on but nothing on screen, not even star
> >> prompt.
> >> Switching on/off had no effect and screen went into power saving after
> >> a while.
> >> Pulled bootdrive, again no apparent effect. Made a cuppa and on return
> >> found
> >> Everything working again. Hmmm. Never had this before, obviously
> checked
> >> Monitor cable etc, all working under windows btw. Any idea?
> >
> > OS4 on some machines will start (after usual 10 seconds), flash
> > keyboard, wait (12 seconds), flash keybord, initiate video and whoosh,
> > it'll be booting without even seeming to wait for the flash drive.
> >
> > Perhaps this is what you saw? I mentioned it on the ROOL forums.
> > This is still faster than OS3, but different to what I encountered
> > before.
> >
>
> Mmh no, I didn't see anything. When rebooting now my monitor simply
> remained dead. Switching off and on again didn't help so I'll need
> to roll back as OS4 leaves me with an unusable machine.
>
Gave it another try, booted from old ROM, swapped in OS4 µSD card and reflashed
it to OS4. However it still refuses to boot and just leaves me sitting in front
of a blank screen. Pressing a key immediately wakes my BB-xM up though, screen
wakes up showing pre-desk and so on.
Patric
--
NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone!
Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx
Other related posts:
