Re: [ARMini-support] Warning - use caution if you need to Revert to OS3

  • From: albutat <albutat@xxxxxx>
  • To: armini-support@xxxxxxxxxxxxx
  • Date: Wed, 25 Apr 2012 02:50:14 +0200

Am 24.04.2012, 21:31 Uhr, schrieb A Rawnsley <rcomp@xxxxxxxxxxx>:

In message <83502888-09ca-4aba-8732-ebd06de5482e@xxxxxxxxxxxxxxxxx>
          Patric Albutat <albutat@xxxxxx> wrote:

Andrew, just had the very odd situation that my screen remained black.
Board lit, keyboard lights on but nothing on screen, not even star prompt.
Switching on/off had no effect and screen went into power saving after
a while.
Pulled bootdrive, again no apparent effect. Made a cuppa and on return found
Everything working again. Hmmm. Never had this before, obviously checked
Monitor cable etc, all working under windows btw. Any idea?

OS4 on some machines will start (after usual 10 seconds), flash
keyboard, wait (12 seconds), flash keybord, initiate video and whoosh,
it'll be booting without even seeming to wait for the flash drive.

Perhaps this is what you saw?  I mentioned it on the ROOL forums.
This is still faster than OS3, but different to what I encountered
before.


Mmh no, I didn't see anything. When rebooting now my monitor simply
remained dead. Switching off and on again didn't help so I'll need
to roll back as OS4 leaves me with an unusable machine.

Patric
---
To alter your preferences or leave the group, visit //www.freelists.org/list/armini-support
List-related queries to info@xxxxxxxxxxxx

Other related posts: