[argyllcms] Re: dispcal/dispread/dispwin test window stops updating at some point
- From: Florian Höch <lists+argyllcms@xxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sun, 17 Oct 2010 17:19:53 +0200
Am 17.10.2010 06:18, schrieb Graeme Gill:
Florian Höch wrote:
Yes, it seems to be hard to reproduce (only the one Win7 64bit system I
have shows the problem). I use KatMouse under another system (WinXP SP2
32bit) too, there it doesn't cause any issues.
I was only trying it on Win7 64bit.
Ok. I just realized I didn't answer some of your older questions yet, so
here is some missing information.
Graphics card is an nVidia GTX 275 896 MB, driver v257.21
The desktop is pretty much default, with some of the visual 'bling'
disabled (window and taskbar animations, menu and quickinfo fade animation).
Utilities which load on startup (in addition to KatMouse) are RivaTuner
(just for fan control of the graphics card), Virtual CloneDrive, MS
Security Essentials, and Logitech SetPoint.
[ btw, should the above linked file be different from the one you posted
on October 14? I tried clearing the cache, re-downloading, and even
another browser, but I still get the same version. No proxy. ]
Sorry, I uploaded to the wrong location. Try it again now:
<http://www.argyllcms.com/ccmxmake.zip> 2124745 bytes
Graeme Gill.
Thanks, got the new version. The behavior with it is interesting, just
when it tries to set 12.5% grey, the test window disappears, and
reappears after setting red, but stays 'frozen' on the red color
(everything is ok when I disable KatMouse). Another thing I just
noticed: Shortly before the test window disappears, its taskbar entry
("Argyll Display Calibration Window") appears and then stays in the
taskbar until it's finished, which doesn't happen if KatMouse is
deactivated (the taskbar entry shows for a short amount of time at the
end, after setting yellow).
Output from dispwin -D5:
MonitorEnumProc() called with hMonitor = 0x10001
MonitorEnumProc() set initial monitor info: 0,0 1360,768 name '\\.\DISPLAY1'
get_displays about to get monitor information for 0
Mon 0, name '\\.\DISPLAY1\Monitor0'
Mon 0, string 'PnP-Monitor (Standard)'
Mon 0, flags 0x3
Mon 0, id 'MONITOR\SAM01FF\{4d36e96e-e325-11ce-bfc1-08002be10318}\0004'
Mon 0, key
'\Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0004'
Mon 1, name '\\.\DISPLAY1\Monitor1'
Mon 1, string 'NEC MultiSync LCD2690WUXi(Digital)'
Mon 1, flags 0x2
Mon 1, id 'MONITOR\NEC66CB\{4d36e96e-e325-11ce-bfc1-08002be10318}\0003'
Mon 1, key
'\Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0003'
EnumDisplayDevices failed on '\\.\DISPLAY1' Mon = 2
get_displays added description 'DISPLAY1, at 0, 0, width 1360, height
768 (Primary Display)' to display 0
About to open display '\\.\DISPLAY1'
Handling message type 0x81
It's a message not handled here
Handling message type 0x83
It's a message not handled here
Handling message type 0x1
It's a message not handled here
Handling message type 0x5
It's a message not handled here
Handling message type 0x3
It's a message not handled here
Handling message type 0x18
It's a message not handled here
Handling message type 0x46
Handling message type 0x1c
It's a message not handled here
Handling message type 0x86
It's a message not handled here
Handling message type 0x6
It's a message not handled here
Handling message type 0x281
It's a message not handled here
Handling message type 0x282
It's a message not handled here
Handling message type 0x7
It's a message not handled here
Handling message type 0x85
It's a message not handled here
Handling message type 0x14
It's a message not handled here
Handling message type 0x47
It's a message not handled here
Handling message type 0xf
It's a paint message
dispwin_set_color called
Handling message type 0xf
It's a paint message
Setting White
dispwin_set_color called
Handling message type 0xf
It's a paint message
Setting 75% Grey
dispwin_set_color called
Handling message type 0xf
It's a paint message
Setting 50% Grey
dispwin_set_color called
Handling message type 0xf
It's a paint message
Setting 25% Grey
dispwin_set_color called
Handling message type 0x7f
It's a message not handled here
Handling message type 0xf
It's a paint message
Setting 12.5% Grey
dispwin_set_color called
Handling message type 0x46
Handling message type 0xc0f4
It's a message not handled here
Handling message type 0xf
It's a paint message
Handling message type 0x85
It's a message not handled here
Handling message type 0x14
It's a message not handled here
Setting Black
dispwin_set_color called
Handling message type 0xf
It's a paint message
Setting Red
dispwin_set_color called
Handling message type 0xf
It's a paint message
Setting Green
dispwin_set_color called
Setting Blue
dispwin_set_color called
Setting Cyan
dispwin_set_color called
Setting Magenta
dispwin_set_color called
Setting Yellow
dispwin_set_color called
dispwin_get_ramdac called
Darkening screen
dispwin_set_ramdac called
Lightening screen
dispwin_set_ramdac called
Restoring screen
dispwin_set_ramdac called
Normal beep
Good beep
Bad double beep
dispwin_del called
Handling message type 0x90
It's a message not handled here
Handling message type 0x281
It's a message not handled here
Handling message type 0x282
It's a message not handled here
Handling message type 0x2
It's a destroy message
Handling message type 0x82
It's a message not handled here
--
Florian Höch
Other related posts:
