And thank you for your work from me too! One of feature that I hope you implements as soon as possible is the the profile verification :-) Marco Il giorno 25/gen/2010, alle ore 22.38, Bruce Houston ha scritto: > Thank you, Florian! > > Bruce Houston > > -----Original Message----- > From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx] > On Behalf Of Florian Höch > Sent: Sunday, January 24, 2010 8:21 AM > To: argyllcms@xxxxxxxxxxxxx > Subject: [argyllcms] dispcalGUI 0.3.0.6 (RC) > > Hi everyone, > > a new version of dispcalGUI is available (not "officially" on my website > yet, download links below). It's mostly a maintenance release, with the > following most notable changes and fixes: > > * Support for Argyll 1.1.0 adaptive emissive display measurement mode > with the i1 Pro. Highres measurement mode is also no longer implicit, > but user-selectable. > > * All of Argyll's profile types are now available (Lab/XYZ LUT, > Shaper+Matrix, Gamma+Matrix etc). XYZ LUT + R <-> G swapped matrix is > now the default for "Photo" and "Prepress" presets. > > * The LUT viewer can optionally show the actual LUT curves from the > video card (thanks to dispwin's -s option introduced in Argyll > 1.1.0), and matrix profile's rTRC/gTRC/bTRC curves. > > * You can now check for updates and access the ReadMe, license, bug > tracker and support forum through the 'Help'/'?' menu. > > * Linux: In multi-display setups using separate X screens, it should no > longer be necessary to launch dispcalGUI on the display you want to > measure (previously, you had to run `DISPLAY=:0.x dispcalGUI`, with x > being the zero-based index of the display). > > * Linux: Selection of display used for video LUT access should now work > correctly in setups where LUT access is not available for some > displays. > > * Linux/Mac OS X: When installing a profile in local system scope, > the password was not accepted (I'd appreciate feedback on this as I > can only test under Ubuntu 9.10 and Mac OS X 10.4.11 atm). > > Detailed changelog is in the ReadMe, available here: > http://dispcalGUI.hoech.net/README-0.3.0.6.html > > Download links: > > Linux http://dispcalGUI.hoech.net/dispcalGUI-0.3.0.6.package > (autopackage, see ReadMe if you need installation instructions) > Mac OS X http://dispcalGUI.hoech.net/dispcalGUI-0.3.0.6.dmg > Windows http://dispcalGUI.hoech.net/dispcalGUI-0.3.0.6-Setup.exe > Source http://dispcalGUI.hoech.net/dispcalGUI-0.3.0.6.tar.gz > > - Florian Höch > > > >