[argyllcms] Re: dispcalGUI 0.3.0.6 (RC)
- From: "Bruce Houston" <bhouston1@xxxxxxxxxxx>
- To: <argyllcms@xxxxxxxxxxxxx>
- Date: Mon, 25 Jan 2010 15:38:35 -0600
Thank you, Florian!
Bruce Houston
-----Original Message-----
From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx]
On Behalf Of Florian Höch
Sent: Sunday, January 24, 2010 8:21 AM
To: argyllcms@xxxxxxxxxxxxx
Subject: [argyllcms] dispcalGUI 0.3.0.6 (RC)
Hi everyone,
a new version of dispcalGUI is available (not "officially" on my website
yet, download links below). It's mostly a maintenance release, with the
following most notable changes and fixes:
* Support for Argyll 1.1.0 adaptive emissive display measurement mode
with the i1 Pro. Highres measurement mode is also no longer implicit,
but user-selectable.
* All of Argyll's profile types are now available (Lab/XYZ LUT,
Shaper+Matrix, Gamma+Matrix etc). XYZ LUT + R <-> G swapped matrix is
now the default for "Photo" and "Prepress" presets.
* The LUT viewer can optionally show the actual LUT curves from the
video card (thanks to dispwin's -s option introduced in Argyll
1.1.0), and matrix profile's rTRC/gTRC/bTRC curves.
* You can now check for updates and access the ReadMe, license, bug
tracker and support forum through the 'Help'/'?' menu.
* Linux: In multi-display setups using separate X screens, it should no
longer be necessary to launch dispcalGUI on the display you want to
measure (previously, you had to run `DISPLAY=:0.x dispcalGUI`, with x
being the zero-based index of the display).
* Linux: Selection of display used for video LUT access should now work
correctly in setups where LUT access is not available for some
displays.
* Linux/Mac OS X: When installing a profile in local system scope,
the password was not accepted (I'd appreciate feedback on this as I
can only test under Ubuntu 9.10 and Mac OS X 10.4.11 atm).
Detailed changelog is in the ReadMe, available here:
http://dispcalGUI.hoech.net/README-0.3.0.6.html
Download links:
Linux http://dispcalGUI.hoech.net/dispcalGUI-0.3.0.6.package
(autopackage, see ReadMe if you need installation instructions)
Mac OS X http://dispcalGUI.hoech.net/dispcalGUI-0.3.0.6.dmg
Windows http://dispcalGUI.hoech.net/dispcalGUI-0.3.0.6-Setup.exe
Source http://dispcalGUI.hoech.net/dispcalGUI-0.3.0.6.tar.gz
- Florian Höch
Other related posts:
