[argyllcms] Re: dispcal - blackpoint still corrected despite -k 0.0

From: Graeme Gill <graeme@xxxxxxxxxxxxx>
To: argyllcms@xxxxxxxxxxxxx
Date: Thu, 28 Oct 2010 13:23:33 +1100

Gerhard Fuernkranz wrote:

Assume for instance a display where RGB numbers of 0, 1, 2, 3, ..., 6, 7
all result in a black output on the screen (within measurement
tolerances) and only numbers>= 8 result in an output brighter than
black. Then it does not matter whether you drive the display with 0 or 3


Thanks Gerhard, for an clear illustration. This is what I mean by
the display response having a "flat spot".

Graeme Gill.

References:
- [argyllcms] dispcal - blackpoint still corrected despite -k 0.0
  - From: Anders Torger
- [argyllcms] Re: dispcal - blackpoint still corrected despite -k 0.0
  - From: Graeme Gill
- [argyllcms] Re: dispcal - blackpoint still corrected despite -k 0.0
  - From: Anders Torger
- [argyllcms] Re: dispcal - blackpoint still corrected despite -k 0.0
  - From: Gerhard Fuernkranz

Other related posts:

» [argyllcms] dispcal - blackpoint still corrected despite -k 0.0- Anders Torger
» [argyllcms] Re: dispcal - blackpoint still corrected despite -k 0.0- Graeme Gill
» [argyllcms] Re: dispcal - blackpoint still corrected despite -k 0.0- Anders Torger
» [argyllcms] Re: dispcal - blackpoint still corrected despite -k 0.0- Gerhard Fuernkranz
» [argyllcms] Re: dispcal - blackpoint still corrected despite -k 0.0- Graeme Gill
» [argyllcms] Re: dispcal - blackpoint still corrected despite -k 0.0 - Graeme Gill